Add products to your shopping cart
#1132833
Image for Illustration purposes only. Actual product may vary
- Brand: MRC Bearing
- Model: 488016
- Condition: NEW
- SKU: 1132833
MRC 488016 SINGLE ROW BALL BRGS
View additional description- Typically ships in: 1 day
- Weight: 0.1 lb
$31.00 Each
FREE SHIPPING
ON ORDERS OVER $20
Select Quantity
Jan. 6, 2019
To prevent misalignment, it is important to inspect the system’s shaft as well as housings to identify runout bearing seats, shoulders, and precision-grade lockouts.
Read MoreAdditional Description
| Manufacturer: | MRC Bearing Service |
|---|---|
| Weight: | 0.113 lbs. |
| Product Name: | Felt Seal Replacement Bearing |
| Description: | Wide Inner Ring Bearing, 16 mm ID x 35 mm OD x 0.567" Wide, Double Sealed With Snap Ring (Contact), Standard Precision (ABEC 1), Steel Cage, Normal Clearance (C0) |
| Inch/Metric | Metric Bore | Bore Type | Round Bore |
|---|---|---|---|
| I.D. | 16 mm | O.D. [Min] | |
| O.D. [Max] | O.D. | 35 mm | |
| Width [Min] | Width [Max] | ||
| Width | 14.4018 mm | Enclosure | Double Sealed |
| Rows of Balls | Single | Material | Steel |
| O.D. Type | Straight w/ Snap Ring | Bearing Type | Radial |
| Precision | Standard | Radial Internal Clearance Specification | Normal Clearance |
| Ambient Temperature Range [Min] | Ambient Temperature Range [Max] | ||
| Ball Material | Steel | Cage Type | Metal |
| Capacity | Standard Capacity | Contact Angle | 0° |
| Guide Type | Lubrication | ||
| Outer Ring Width | 11 mm | Precision Level | Standard (ABEC 1) |
| Preload Level | None | Seal Material | Rubber |
| Seal Type | Contact Seals | Seal Width | |
| Dynamic Load Rating | 1710 lbf | Static Load Rating [Max] | 843 lbf |
| Ball Dia. | Bearing Design | ||
| Bore B | Cage Material | Steel | |
| Collar No. | Collar O.D. | ||
| Collar Width | Corner Radius [Min] | ||
| Eccentric Collar Offset | Fillet Radius | 0.025 in | |
| Flange O.D. [Max] | Flange O.D. | ||
| Flange Width [Max] | Flange Width | ||
| Flush Ground | Housing Shoulder Diameter [Min] | ||
| Housing Shoulder Diameter [Max] | Housing Shoulder Diameter | ||
| Industry Standard Part # | Inner Ring O.D. | ||
| Inner Ring Offset | Inner Ring Width | 0.567 in | |
| Internal Design | Limiting Speed | 13000 rpm | |
| Limiting Speed - Grease | 13000 rpm | Limiting Speed - Oil | |
| Limiting Speed - Sealed | Locking Device | No Locking Device | |
| Lube Hole Center | Lubricant | Polyurea Base | |
| Misalignment Range | No. in Set | Single Bearing | |
| No. of Balls | O.D. (B) | ||
| Outer Ring | Outer Ring Inner Diameter | ||
| Outer Ring Size | Peak Running Torque (mg-mm) | ||
| Peak Starting Torque (mg-mm) | Pre Lubricant | ||
| Preload Amount | Radial Internal Clearance | Normal | |
| Radial Load Rating [Max] | Radial Rigidity (lbf/µm) | ||
| Reference Speed | Seal O.D. | ||
| Seal Protection Width | Seating Washer | ||
| Series | Set Screw Offset | ||
| Set Screw Size | Shaft Shoulder Diameter [Min] | ||
| Shaft Tolerance | Snap Ring | With Snap Ring | |
| Snap Ring O.D. | Snap Ring Offset | ||
| Snap Ring Thickness | Special Features | ||
| Stamping | Static Thrust Load Rating [Max] | ||
| Temperature Range [Min] | -22 °F | Temperature Range [Max] | 250 °F |
| Use With |
Documents
Specifications:
| Locking | None |
| I.D. | 0.63 |
| Cage | Metal |
| O.D. | 1.378 |
| Bearing Type | Radial |
| Enclosure | Double Sealed |