Categories

Add products to your shopping cart

#1133869

R24FF

Image for Illustration purposes only. Actual product may vary

MRC R24FF INST & MINI - INCH BRGS

View additional description
  • Typically ships in: 1 day
  • Weight: 0.4 lb

$44.25 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Return policy

Item must be unused.

Item must be in it's original package.

Product's availability

State of California Proposition 65 Product Warning

Return policy

Item must be unused.

Item must be in it's original package.

Product's availability

State of California Proposition 65 Product Warning

Jan. 6, 2019

It is estimated that about 80% of the bearing failure arise from improper lubrication. This can be insufficient lubrication, improper lubrication, or high temperatures that degrade the lub.

Read More

 

Additional Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 0.406 lbs.
Product Name: R Series Small Inch-Size Ball Bearing
Description: 1 1/2" ID x 2 5/8" OD x 9/16" Wide; Double Shielded; No Snap Ring; Single Row Radial Steel Bearing
Specifications
Inch/Metric Inch Bore Bore Type Round Bore
I.D. 1 1/2 in O.D. [Min]  
O.D. [Max]   O.D. 2 5/8 in
Width [Min]   Width [Max]  
Width 9/16 in Enclosure Double Shielded
Rows of Balls Single Material Steel
O.D. Type Straight Bearing Type Radial
Precision Standard Radial Internal Clearance Specification Normal Clearance
Ambient Temperature Range [Min]   Ambient Temperature Range [Max]  
Ball Material Steel Cage Type Metal
Capacity Standard Capacity Contact Angle
Guide Type   Lubrication  
Outer Ring Width 9/16 in Precision Level Standard (ABEC 1)
Preload Level None Seal Material Metal
Seal Type Non-Contact Seals Seal Width  
Dynamic Load Rating 3780 lbf Static Load Rating [Max] 2650 lbf
Ball Dia.   Bearing Design  
Bore B   Cage Material Steel
Collar No.   Collar O.D.  
Collar Width   Corner Radius [Min]  
Eccentric Collar Offset   Fillet Radius 0.031 in
Flange O.D. [Max]   Flange O.D.  
Flange Width [Max]   Flange Width  
Flush Ground   Housing Shoulder Diameter [Min]  
Housing Shoulder Diameter [Max]   Housing Shoulder Diameter  
Industry Standard Part #   Inner Ring O.D.  
Inner Ring Offset   Inner Ring Width 9/16 in
Internal Design   Limiting Speed  
Limiting Speed - Grease 9000 rpm Limiting Speed - Oil 11000 rpm
Limiting Speed - Sealed 6200 rpm Locking Device No Locking Device
Lube Hole Center   Lubricant Polyurea Base
Misalignment Range   No. in Set Single Bearing
No. of Balls   O.D. (B)  
Outer Ring   Outer Ring Inner Diameter  
Outer Ring Size   Peak Running Torque (mg-mm)  
Peak Starting Torque (mg-mm)   Pre Lubricant  
Preload Amount   Radial Internal Clearance Normal
Radial Load Rating [Max]   Radial Rigidity (lbf/µm)  
Reference Speed   Seal O.D.  
Seal Protection Width   Seating Washer  
Series   Set Screw Offset  
Set Screw Size   Shaft Shoulder Diameter [Min]  
Shaft Tolerance   Snap Ring No Snap Ring
Snap Ring O.D.   Snap Ring Offset  
Snap Ring Thickness   Special Features  
Stamping   Static Thrust Load Rating [Max]  
Temperature Range [Min] -22 °F Temperature Range [Max] 250 °F
Use With      
Product Information
Applications
  • Ample radial and thrust capacity for the majority of applications involving heavy radial loads, heavy thrust loads or combinations of these
Features
  • Single-row, radial, Conrad-type bearings available in inch sizes for shafts from 1/8" to 1 1/2" in diameter
  • Open, shielded and sealed types available
  • Many sizes available in stainless steel
  • Supplied with ABMA CO radial clearance unless otherwise specified

Specifications:

Locking None
I.D. 1 1/2 in
Cage Metal
O.D. 2 5/8 in
Bearing Type Radial
Enclosure Double Shielded