Add products to your shopping cart
#1134030
Image for Illustration purposes only. Actual product may vary
- Brand: MRC Bearing
- Model: XLS8
- Condition: NEW
- SKU: 1134030
MRC XLS8 SINGLE ROW BALL BRGS
View additional description- Typically ships in: 1 day
- Weight: 11.6 lb
$2,584.33 Each
FREE SHIPPING
ON ORDERS OVER $20
Select Quantity
Jan. 6, 2019
To identify contaminations, you should check for denting on the rolling elements and vibrations. To fix the problem, you should always filter the lub to clear foreign matter and work on clean areas. It is also crucial to clean the tools, fixtures, and fixtures to ensure you reduce the risk of contamination.
Read MoreAdditional Description
| Manufacturer: | MRC Bearing Service |
|---|---|
| Weight: | 11.56 lbs. |
| Product Name: | XLS Type Angular Contact Ball Bearing |
| Description: | Single Row Angular Contact Bearing, 8" ID x 10.75" OD x 1.375" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Normal Clearance (C0), 15° Contact Angle |
| Inch/Metric | Inch Bore | Bore Type | Round Bore |
|---|---|---|---|
| I.D. | 8 in | O.D. [Min] | |
| O.D. [Max] | O.D. | 10 3/4 in | |
| Width [Min] | Width [Max] | ||
| Width | 1 3/8 in | Enclosure | Open |
| Rows of Balls | Single | Material | Steel |
| O.D. Type | Straight | Bearing Type | Angular Contact |
| Precision | Standard | Radial Internal Clearance Specification | Normal Clearance |
| Ambient Temperature Range [Min] | Ambient Temperature Range [Max] | ||
| Ball Material | Steel | Cage Type | Metal |
| Capacity | Standard Capacity | Contact Angle | 15° |
| Guide Type | Lubrication | ||
| Outer Ring Width | 1 3/8 in | Precision Level | Standard (ABEC 1) |
| Preload Level | None | Seal Material | None |
| Seal Type | Unsealed | Seal Width | |
| Dynamic Load Rating | 31500 lbf | Static Load Rating [Max] | 45000 lbf |
| Ball Dia. | Bearing Design | ||
| Bore B | Cage Material | Steel | |
| Collar No. | Collar O.D. | ||
| Collar Width | Corner Radius [Min] | ||
| Eccentric Collar Offset | Fillet Radius | 3 mm | |
| Flange O.D. [Max] | Flange O.D. | ||
| Flange Width [Max] | Flange Width | ||
| Flush Ground | Housing Shoulder Diameter [Min] | ||
| Housing Shoulder Diameter [Max] | Housing Shoulder Diameter | ||
| Industry Standard Part # | Inner Ring O.D. | ||
| Inner Ring Offset | Inner Ring Width | 1 3/8 in | |
| Internal Design | Limiting Speed | ||
| Limiting Speed - Grease | 2100 rpm | Limiting Speed - Oil | 2500 rpm |
| Limiting Speed - Sealed | Locking Device | No Locking Device | |
| Lube Hole Center | Lubricant | Oil Preservative | |
| Misalignment Range | No. in Set | Single Bearing | |
| No. of Balls | O.D. (B) | ||
| Outer Ring | Outer Ring Inner Diameter | ||
| Outer Ring Size | Peak Running Torque (mg-mm) | ||
| Peak Starting Torque (mg-mm) | Pre Lubricant | ||
| Preload Amount | Radial Internal Clearance | Normal | |
| Radial Load Rating [Max] | Radial Rigidity (lbf/µm) | ||
| Reference Speed | Seal O.D. | ||
| Seal Protection Width | Seating Washer | ||
| Series | Set Screw Offset | ||
| Set Screw Size | Shaft Shoulder Diameter [Min] | ||
| Shaft Tolerance | Snap Ring | No Snap Ring | |
| Snap Ring O.D. | Snap Ring Offset | ||
| Snap Ring Thickness | Special Features | ||
| Stamping | Static Thrust Load Rating [Max] | ||
| Temperature Range [Min] | Temperature Range [Max] | 450 °F | |
| Use With |
| General |
|
|---|
Specifications:
| Locking | None |
| I.D. | 8 in |
| Cage | Metal |
| O.D. | 10 3/4 in |
| Bearing Type | Angular Contact |
| Enclosure | Open |