Right-handed male rod end bearings
are rod ends featuring male, or external, threads, that follow the right-hand rule. This means the thread is installed in a clockwise direction. Right-hand threads are the most common type of thread and are used by default unless a left-hand thread is required. Ask our experts about what type of threading is needed for your application. Rod end bearings comprise an eye-shaped head with integral shank, forming a spherical plain bearing housing unit; they are commonly used in applications where an articulating joint is required, such as aircraft control systems, steering links, and track rollers. Some rod ends may include the bearing, or just the inner ring with or without a sliding layer between the head and the ring. Male rod end bearings are often available in two series: inch dimensions and metric dimensions. Material combinations for the sliding contact surface include steel-on-steel, steel-on-bronze, and steel-on-PTFE fabric or composite material. Steel-on-steel and steel-on-bronze rod ends require regular re-lubrication, however they are wear-resistant and perform well under lubricant starvation conditions. Steel types include low carbon, heat treated alloy and stainless steel. They are highly suitable for applications with heavy alternating loads. Rod ends featuring PTFE are no maintenance bearings and do not require lubrication
; this offers extended operating life, and is suitable for applications with heavy loads in a constant direction. Contact our experts at MRO Supply for information about which male rod end bearing suits your application.