Image for Illustration purposes only. Actual product may vary
- BRAND: SKF Bearing
- SKU: 325706
- CONDITION: NEW
- MODEL: 32228 J2/DF
SKF-Bearing 32228 J2/DF
- Typically ships in: 1 day
- Weight: 72.1 lb
- Free shipping on orders over $20
- Payment methods:
- Unit of Measure: each
|Item #:||32228 J2/DF|
|Item Name:||Single Row, Paired Face-To-Face Tapered Roller Bearings|
|Principal Dimension d:||5.5118 in|
|Principal Dimension D:||9.8425 in|
|Principal Dimension T:||5.6496 in|
|Basic Dynamic Load Ratings C:||247000 lbf|
|Basic Static Load Ratings C0:||450000 lbf|
|Speed Ratings - Reference:||1500 rpm|
|Speed Ratings - Limiting:||2600 rpm|
|The factors that influence SKF bearing performance and service life include but are not limited to the following :|
Roller end/flange contact area
The geometry and surface finish of the roller ends and the area on the flange that makes contact with the roller ends, have been optimized to promote and maintain the formation of a lubricant film. This reduces friction and heat generated by the bearing as well as flange wear. The bearings can better maintain preload and run at reduced noise levels.
To increase service life under misalignment or heavy load conditions, SKF tapered roller bearings have either crowned raceways or a logarithmic profile to prevent stress peaks at the roller ends. The logarithmic profile is designed to optimize load distribution along the rollers.
Consistency of profiles and roller size
The rollers used in SKF tapered roller bearings are made to such close tolerances that they are virtually identical. These extremely close tolerances, together with the precision of the raceway profiles, provide optimal load distribution over the rollers, to reduce noise and vibration levels and enable preload to be set more accurately.
Tapered roller bearings typically have a running- in period. During the running-in period, a conventional design tapered roller bearing experiences a significant amount of friction, resulting in wear, which can be noticed as a temperature spike. With current SKF tapered roller bearing designs, friction, wear and frictional heat are significantly reduced, provided the bearings are mounted and lubricated correctly.
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF