Dodge 117565 SF-60mm 18X4.4mm KW Metric HDW

QD Bushing - Metric Bore/Metric Hardware

• DODGE QD-style bushings stocked in popular finish bore sizes and minimum plain bore, for custom reboring
• DODGE Metric QD bushings supplied with metric hex-head cap screws and lock washers
• Stock reborable bushings available for custom reboring
• Reboring and sawsplit available from DODGE for nominal extra charge
• Can be used with DODGE HTD sprockets for conventional mounting only (English thread hardware required for demounting.)

NOTE: Rebore by others must be sawsplit after rebore

QD Bushings features and Benefits

• 4 Degree Taper
• Easy on/Easy off
• Manufactured precisely to industry standards
• Conventional or Reverse Mounting, Including sizes M thru W - DODGE exclusive!
• QD is a registered trademark of Emerson Electric

Conventional Mounting

• Easy On
• Place bushing in product
• Align clearance holes in product with threaded holes in bushing
• Install screws and lockwashers thru clearance holes, finger tight
• Slide assembly onto shaft, flange first
• Locate assembly on shaft for proper drive align ment
• Tighten cap screws alternately and evenly to specified torque
• Easy Off
  • Remove cap screws and install in product threaded holes
  • Alternately and evenly tighten screws until bush ing grip is released
  • Flanged Design

Reverse Mounting

• Easy On
  • Place bushing in product
  • Align clearance holes in product with threaded holes in bushing
  • Install screws and lockwashers thru clearance holes, finger tight
  • Slide assembly onto shaft, flange outward
  • Locate assembly on shaft for proper drive align ment
  • Tighten cap screws alternately and evenly to specified torque
• Easy Off
  • Remove cap screws and reinstall in flange threaded holes
  • Alternately and evenly tighten screws until bush ing grip is released

IMPORTANT!

Do not use lubricants or anti-seize compounds on tapered bore or bushing surfaces. Complete installation instructions are available at www.dodge-pt.com.