Call (888)-671-2883
 on most items
Text message to Live Chat! (201) 898 - 2676

Fenner Drives 6410144 Trantorque OE 1-7/16"

BRAND: Fenner Drives | MODEL: 6410144 | CONDITION: NEW | SKU: 1435825
Fenner Drives 6410144 Trantorque OE 1-7/16"

Image for Illustration purposes only,
Actual product may vary
Typically In Stock: confirm availability
Returnable: see conditions
Shipping from?: see locations Typically ships in 1 day
Weight: 0.68 lbs UOM: EA

Additional Description




The Trantorque OE Series 1-7/16” Keyless Bushing provides a high capacity, zero-backlash shaft/hub or coupling connection of mounted components to shafts measuring 1-7/16” in diameter by means of a mounted mechanical interference fit and transmits up to 463 ft lbs of torque.

Best Suited For: Applications where speed and simplicity of installation and repositioning are critical and a small OD/ID ratio is important.

Trantorque OE Series 1-7/16” Keyless Bushings provide a zero-backlash frictional connection that will never wear or pound out and can accommodate high-torque, thrust, bending, and/or radial loads. While maintaining a minimal OD/ID ratio, The Trantorque OE Series Keyless Bushings also have exceptional concentricity and the ability to accommodate bending loads. They also have limited axial movement during installation. All Trantorque units use a single hex nut for speed and simplicity of installation.

• Exceptional concentricity and ability to accommodate bending loads
• Limited axial movement during installation
• Minimal OD/ID ratio
• All Trantorque units use a single hex nut for speed and simplicity of installation

Features of Fenner Drives Keyless Bushings:

• Ability to transmit higher torques than keyed connections
• True zero-backlash
• Less equipment downtime
• Ability to mount over existing keyways
• Complete axial and radial adjustability
• Simple installation, adjustment and removal

All Fenner Drives keyless locking devices operate using the simple wedge principle. An axial force is applied- by either a hex nut (Trantorque) or a series of annular screws (B-LOC)- to engage circular steel rings with mating tapers. The resulting wedge action creates a radial force on the tapered rings, one of which contracts to squeeze the shaft while the other expands and presses into the component bore.

Series: Trantorque OE
Torque Transmission: 473 ft lb
Axial Movement: Approximately 0.075"
Compliancy: RoHS
Component Bore Diameter: 2"
Hub Pressure: 10838 psi
Installation Torque: 196 ft lb
Internal/ External: Internal
Material: Steel
Metric/Inch: Inch
Releasing/ Locking: Locking
Self-Centering: Yes
Shaft Diameter: 1 7/16"
Taper: Single
Thrust: 7878 lbf