Image for Illustration purposes only. Actual product may vary
- Brand: Fenner Drives
- Model: 6202120UP
- Condition: NEW
- SKU: 1435999
6202120UP Trantorque GT 5/8" SteelView additional description
- Typically ships in: 1 day
- Weight: 0.5 lb
- Contact supplier for technical support on: 800-243-3374
- MOQ: 3
Unit of measure: each
Returnable: See conditions
The Trantorque GT Series 5/8” Keyless Bushing provides a high capacity, zero-backlash shaft/hub or coupling connection of mounted components to shafts measuring 5/8” in diameter by means of a mechanical interference fit and transmits up to a maximum 153 ft lbs of torque.
Best Suited For: Applications where speed and simplicity of installation and repositioning are critical and will benefit from the value added feature of a counter torque nut.
Trantorque GT Series 5/8” Keyless Bushings provide a zero-backlash frictional connection that will never wear or pound out and can accommodate high-torque, thrust, bending, and/or radial loads. Designed with an external counter torque nut for easier installation, by allowing the system to be held from rotating during installation. The Trantorque GT Series Keyless Bushing has exceptional concentricity while maintaining the ability to accommodate bending loads. There is limited axial movement during installation. All Trantorque units use a single hex nut for speed and simplicity of installation.
• Designed with external counter-torque flange
• Exceptional concentricity and ability to accommodate bending loads
• Limited axial movement during installation
• All Trantorque units use a single hex nut for speed and simplicity of installation
Features of Fenner Drives Keyless Bushings:
• Ability to transmit higher torques than keyed connections
• True zero-backlash
• Less equipment downtime
• Ability to mount over existing keyways
• Complete axial and radial adjustability
• Simple installation, adjustment and removal
All Fenner Drives keyless locking devices operate using the simple wedge principle. An axial force is applied- by either a hex nut (Trantorque) or a series of annular screws (B-LOC)- to engage circular steel rings with mating tapers. The resulting wedge action creates a radial force on the tapered rings, one of which contracts to squeeze the shaft while the other expands and presses into the component bore.
|Torque Transmission:||153 ft lb|
|Axial Movement:||Approximately 0.075"|
|Component Bore Diameter:||1 1/2"|
|Hub Pressure:||13347 psi|
|Installation Torque:||100 ft lb|
Worked out great for my project, and at a great price!!Read more
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/