Image for Illustration purposes only. Actual product may vary
- BRAND: TB Woods
- SKU: 338559
- CONDITION: NEW
- MODEL: WE20
TBWOODS WE20 WE20 STD D-FLEX ELMT
- Typically ships in: 1 day
- Weight: 3.1 lb
- Contact supplier for technical support on: 888-829-6637
- Free shipping on orders over $20
- Contiguous U.S. States
- Payment methods:
- Returnable: See conditions
- Unit of Measure: each
|Unit Of Measure||English|
|Material Type||Polyether Urethane|
|Capscrew Torque Requirement ft lbs||30 (Must use TB Wood's Capscrews)|
|Capscrews||3/8-16 UNC x 5/8|
|Component Weight lbs||3.10|
|Description||TB Wood’s Dura-Flex couplings are designed from the ground up using finite element analysis to maximize flex life. Perfect for a wide variety of applications -- including those with uniform to heavy shock loads -- Dura-Flex couplings employ a light weight element that absorbs shock loading and torsional vibration. These couplings are available in stock bore-to-size (BTS), Taper-Lock and Sure-Grip bushed (QD) hubs.|
|Family Name||Dura-Flex Coupling|
|HP Rating 100 RPM||3.7|
|HP Rating 1150 RPM||42.0|
|HP Rating 1200 RPM||44.0|
|HP Rating 1750 RPM||64.0|
|HP Rating 1800 RPM||66.0|
|HP Rating 300 RPM||11.0|
|HP Rating 3450 RPM||126.0|
|HP Rating 3600 RPM||126.0|
|HP Rating 50 RPM||1.8|
|HP Rating 690 RPM||25.0|
|HP Rating 870 RPM||32.0|
|Max RPM rpm||6,600|
|Maximum Angular Misalignment||3º|
|Maximum Parallel Misalignment in||3/32|
|Outside Diameter D in||7.36|
|Product Family||Dura-Flex Element|
|Product Description||Standard Two Piece Element|
|Stiffness in lbs rad||27,600|
|Temperature Rating||- 40Fº to 200Fº|
|Torque Rate in lbs||2300|
|Width L in||4.24|
Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.