Call (888)-671-2883
 on most items
Text message to Live Chat! (201 TXT-2MRO)

LoveJoy 69790492484 FLAMM 3 HUB 608/808 MTR FRM

BRAND: LoveJoy | MODEL: 69790492484 | CONDITION: NEW | SKU: 1795553
LoveJoy 69790492484 FLAMM 3 HUB 608/808 MTR FRM

Image for Illustration purposes only,
Actual product may vary
Typically In Stock: confirm availability
Returnable: see conditions
Shipping from?: see locations Ships in 1 day
Weight: 12.65 lbs UOM: EA

Additional Description



FLAMM Type (Flex-Flex All-Metal Labyrinth Seal Mill Motor Coupling) Hubs - Finished (AISE Frame) Bore

The FLAMM Type coupling consists of one FLAMM Mill Type hub, one standard FLA Type flex hub, two standard FLA Type flex sleeves, and one accessory kit. This coupling is supplied with exposed bolts as standard, with shrouded bolts are available upon request through size 5.5.

The FLAMM Type Mill hub accommodates AISE Mill Motor frame sizes (with the two sleeves and second hub being standard FLA Type).

Description FLAMM 3 HUB 608/808 MTR FRM
Hub StyleExposed Bolt
TypeGear Coupling Hubs
Hub MaterialAll Metal
Coupling TypeGear
AISE Motor Frame Size608/808
Weight12.65 lb
Complete Coupling Weight104.00 lb
Dimensional Data
Bore Size 2.9980 to 2.9990 in
Keyway Size (W x D)3/4 x 1/4 in
Length thru Bore4.500 in114.30 mm
Dimension BSE10.190 in4.83 mm
Dimension D6.910 in175.51 mm
Dimension FD9.44 in239.78 mm
Dimension G1.440 in36.58 mm
Dimension HD4.250 in107.95 mm
Dimension HD16.840 in173.74 mm
Dimension OAL29.530 in242.06 mm
Dimension OAL39.340 in237.24 mm
Dimension LTB12.910 in73.91 mm
Dimension LTB24.500 in114.30 mm
Dimension TB2.998 to 2.999 in76.15 to 76.17 mm
Distance between Shaft Ends (Dimension BSE)0.19 in4.83 mm
Cubic inches81.28125 in³
Performance Data
Nominal Torque94500 in·lb10700 N·m
Max. Speed (Unbalanced)4000 rpm
Max. Speed (Balanced)6000.00 rpm
Max. Angular Misalignment1.50º per Gear Mesh
  • Patented Vari-Crown® tooth form for long life on Flex Half
  • Standard 20° pressure angle
  • Heat treated bolts for greater strength
  • Corrosion resistant bolts and nuts for ease of maintenance
  • Provides parallel, angular misalignment and end float
  • Flex Half coupling interchangeable with industry standards
  • Long Universal Hub used for A.I.S.E. Motor Frames
  • Bore taper is 1-1/4 inch per foot on diameter.
  • Exposed Bolt Design is standard.
  • Shrouded Bolt Design available upon request for sizes 1.5 through 5.
  • Puller Holes are standard on sizes 4 through 7.
  • Puller Holes are available for sizes 1.5 through 3.5 at an additional charge.
  • Interference bores with no set screws are standard unless otherwise specified.
  • Inch bore and keyway tolerances conform to AGMA 9002-B04.
  • For metric bore and keyway tolerances, consult Lovejoy Engineering Section.