Call (888)-671-2883
 on most items
Text message to Live Chat! (201) 898 - 2676

C 4.5 SEAL

BRAND: LoveJoy | MODEL: 69790400388 | CONDITION: NEW | SKU: 1795685
C 4.5 SEAL

Image for Illustration purposes only,
Actual product may vary
Typically In Stock: confirm availability
Returnable: see conditions
Shipping from?: see locations Typically ships in 1 day
Weight: 0.54 lbs UOM: EA

Additional Description



C Type Universal Seals ONLY - for Standard Continuous Sleeve Gear Coupling Types (C, CFR, CMM, CSPCR, CSHP, etc)

For use with all Standard Lovejoy Continuous Sleeve Gear coupling types (C, CFR, CMM, CSPCR, CSHP, etc).

Note: Seals are included in Continuous Sleeve Gear Coupling Accessory Kits, and are generally not ordered as a stand alone item.

Description C 4.5 SEAL
TypeUniversal Seals
Hub MaterialSteel
Coupling TypeGear
Weight0.54 lb
Complete Coupling Weight126.00 lb
Dimensional Data
Height9.000 in
Depth0.500 in
Dimension HL12.000 in
Cubic inches54.00000 in³
Dimensional Data of Related Coupling
Overall Length10.250 in260.35 mm
Outside Diameter9.500 in9.50 mm
Size4 1/2
Max. Bore (Dimensions ID1/ID2)4.750 in130.00 mm
Dimension CBD7.250 in184.15 mm
Dimension DC0.250 in6.35 mm
Dimension HD7.250 in184.15 mm
Dimension HL5.000 in127.00 mm
Dimension LS4.880 in123.95 mm
Dimension R10.380 in263.65 mm
Dimension SL2.440 in61.98 mm
Distance between Shaft Ends (Dimension G)0.250 in6.35 mm
Distance between Shaft Ends (Dimension G1)0.750 in19.05 mm
Performance Data
Normal Temperature Range-40 to 212 ºF
Performance Data of Related Coupling
Nominal Torque184000.00 in·lb
Max. Speed (Unbalanced)2200 rpm
Parallel Misalignment0.007 in
Max. Angular Misalignment0.25º per Mesh
  • Simple and inexpensive type of gear coupling
  • All steel sleeves and hubs
  • Reinforced rubber seals with snap rings to hold lubricant in place
  • Available as vertical and horizontal couplings
  • Wide variety of special variations such as full-flex, flex-rigid mill motor
  • Standard configurations are available of the shelf
  • Puller Holes are standard on sizes 4 through 12.
  • Puller Holes are available for sizes 7/8 through 3.5 at an additional charge.
  • The BSE (distance Between Shaft Ends) may vary between G and G1.
  • Interference bores with no set screws are standard unless otherwise specified.
  • Inch bores and keyway tolerances conform to ANSI / AGMA 9002-B04.
  • For metric bores and keyway tolerances, consult Lovejoy Engineering Section.
  • Larger sizes are available, please consult Lovejoy Technical Support.