- The AL Type coupling consists of two standard AL Type hubs and one spider (find under L Type components, or the AL section for AL150).
- Unless stated otherwise, hub torque and horsepower ratings assume a SOX(NBR) rubber spider is being used.
|Description||AL095 HUB 3/4 3/16X3/32 KW|
|# of Jaws||3|
|Elastomeric Member||SOX (NBR) Rubber|
|Weight - Solid||0.60 lb|
|Weight (Complete Coupling w/ Max. Bores)||0.80 lb|
|Bore Size||3/4 in|
|Thread (Dimension T)||5/16-18|
|Keyway Size (W x D)||3/16 x 3/32 in|
|Length thru Bore||1 in25.4 mm|
|Overall Length||2.500 in63.50 mm|
|Min. Bore (Dimensions ID1/ID2)||0.500 in13.00 mm|
|Max. Bore (Dimensions ID1/ID2)||1.125 in29.00 mm|
|Hub Length||1.500 in38.10 mm|
|Dimension G||0.5 in12.7 mm|
|Dimension HD||2.120 in53.85 mm|
|Dimension SL||0.440 in11.18 mm|
|Cubic inches||6.74160 in³|
|Nominal Torque||194.00 in·lb|
|Max. Speed||9000.00 rpm|
|Moment of Inertia (Solid) WR2||0.336 lb·in²|
|Rated HP at 100 rpm||0.31 hp|
|Rated HP at 1,200 rpm||3.72 hp|
|Rated HP at 1,800 rpm||5.50 hp|
|Rated HP at 3,600 rpm||11.16 hp|
- Nitrile Butadiene (Buna N) Rubber is a flexible elastomer material that is oil resistant, resembles natural rubber in resilience and elasticity and operates effectively in temperature range of -40° to 212° F (-40° to 100° C). Good resistance to oil. Standard elastomer. (Also applies to SXB Cushions.)
- Interchangeable with all hub sizes standard for the L-Line and AL-Line products
- Available in a variety of different finished bore and keyway combinations
- Finished bores passivated for additional rust protection
- Lovejoy does not recommend reboring AL hubs.
- All hubs are supplied standard with one set screw, except the AL150 which is provided with two set screws.
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may applied to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/