Call (888)-671-2883
 on most items
Text message to Live Chat! (201) 898 - 2676

LoveJoy 68514476225 U75S CPLG 11MMX5/8 KW BE

BRAND: LoveJoy | MODEL: 68514476225 | CONDITION: NEW | SKU: 1796332
LoveJoy 68514476225 U75S CPLG 11MMX5/8 KW BE

Image for Illustration purposes only,
Actual product may vary
Typically In Stock: confirm availability
Returnable: see conditions
Shipping from?: see locations Ships in 1 day
Weight: 0.71 lbs UOM: EA

Additional Description



U Type Shaft-to-Shaft
    The U Type is the basis for all Uniflex couplings. It is a shaft-to-shaft flexible coupling with a simple one piece design, making it ideal for indexing, robotic or positioning applications. The U Type consists of a triple-wound flexible steel spring brazed to a steel hub at each end. This all steel design ensures optimum equipment protection in severe environments and/or high temperature applications. Regular and short versions are available for most sizes to accommodate different overall length requirements. Special hub or bore modifications are also possible. These units can be supplied with either pin holes or with keyways and set screws. Lovejoy does not recommend the reboring of uniflex couplings by customers due to potential damage to the brazed joint.
    This is a durable one-piece flexible coupling for general purpose shaft-to- shaft applications. It is the basis for all Uniflex coupling types.
Description U75S CPLG 11MMX5/8 KW BE
Hub StyleShort
Weight0.71 lb
Bore TypeFinished Bore
Dimensional Data
Bore Size   11 mm x 5/8 in mm
Hub SizeU75S
Set Screw Thread Size (Dimension T)M6 x 6 & 1/4-20
Keyway Size4 x 1.8 mm & 3/16 x 3/32 in
Dimension HD1.420 in36.07 mm
Overall Length2.720 in69.09 mm
Pin Location (Dimension SL)0.44 in
Length thru Bore0.840 in21.34 mm
Min. Bore (Dimensions ID1/ID2)0.394 in10.00 mm
Max. Bore (Dimensions ID1/ID2)0.748 in19.00 mm
Cubic inches5.48461 in³
Performance Data
Operating Temperature Range-40 to 250 ºF
Max. Torque175 in·lb
Max. Speed20000.00 rpm
Axial Misalignment (∆ Ka)0.020 in0.51 mm
Max. Parallel Misalignment0.019 in0.48 mm
Wind-Up Angle at Nominal Torque1.12 º
Wind-Up Angle at Max. Torque3.00 º
Rated HP at 100 rpm0.28 hp
# of Set Screws Required per Hub1
Coupling Design
    The Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling.
  • Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information.
  • OAL Tolerance: + 1/8 inch.