Image for Illustration purposes only
Actual product may vary
- The J Type flanges in sizes 3J and 4J are made from die cast of high strength zinc alloy (tensile strength of 41,000 psi) and are furnished bore-to-size.
- Size 5J is provided in either zinc alloy or cast iron depending on the bore size.
- Size 6J is made from cast iron.
- J flanges are compatible with EPDM or Neoprene sleeves.
- Each flange has a keyway and two set screws (one set screw over the key and one at 90° to the keyway).
- The J Type coupling consists of two flanges and one sleeve.
|Description||3J FLNG 15MM 5X2.3MM KW|
|Material||Zinc Die Cast|
|Bore Type||Finished Bore|
|Bore Size||15 mm|
|Thread (Dimension T)||1/4-20|
|Keyway Size (W x D)||5 x 2.3 mm|
|Outside Diameter||2.062 in52.37 mm|
|Max. Bore||0.875 in|
|Dimension FL||0.380 in9.65 mm|
|Dimension HD||1.500 in38.10 mm|
|Dimension L||0.810 in20.57 mm|
|Dimension P||0.440 in11.18 mm|
|Dimension SL||0.250 in6.35 mm|
|Cubic inches||3.44399 in³|
|Nominal Torque (with EPDM Sleeve)||60 in·lb6.78 N·m|
|Max. Speed||9200.00 rpm|
|Torsional Stiffness||229.00 in·lb/rad|
|Rated HP at 100 rpm||0.10 hp|
|Rated HP at 1,200 rpm||1.10 hp|
|Rated HP at 1,800 rpm||1.70 hp|
|Rated HP at 3,600 rpm||3.40 hp|
- Spacing between shafts should be greater than 1/8 inch and less than OAL minus the sum of the two bore dimensions.
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may applied to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/