Image for Illustration purposes only. Actual product may vary
- S flanges are made of high strength cast iron and are bored-to- size for a slip fit on standard shafts.
- S flanges are easy to install, are readily available from stock in a wide range of popular bore sizes, and are supplied with two set screws at 90°.
- The S Type coupling consists of two flanges and one sleeve.
|Description||9S FLNG 24MM N/KW|
|Bore Type||Finished Bore|
|Bore Size||24.00 mm|
|Thread (Dimension T)||1/2-13|
|Keyway Size (W x D)||No Keyway|
|Outside Diameter||6.350 in161.29 mm|
|Max. Bore (Dimension ID)||2.375 in|
|Dimension FL||1.030 in26.16 mm|
|Dimension HD||3.630 in92.20 mm|
|Dimension L||2.410 in61.21 mm|
|Dimension P||0.780 in19.81 mm|
|Dimension SL||0.410 in10.41 mm|
|Cubic inches||97.17723 in³|
|Nominal Torque (with EPDM Sleeve)||1800 in·lb203.37 N·m|
|Max. Speed||3750.00 rpm|
|Torsional Stiffness||6875.00 in·lb/rad|
|Rated HP at 100 rpm||2.90 hp|
|Rated HP at 1,200 rpm||34.00 hp|
|Rated HP at 1,800 rpm||51.00 hp|
|Rated HP at 3,600 rpm||103.00 hp|
- All standard finished bore keyway flanges have 2 set screws at 90°.
- Sizes 13, 14 and 16 RSB flanges are suitable for reboring and have two set screws at 90°.
- Sizes 5-12 RSB flanges have no set screws.
- Metric Bore / Keyway per DIN specifications.
- Spacing between shafts should be greater than 1/8 inch and less than OAL minus the sum of the two bore dimensions.
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may applied to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/