Categories

Add products to your shopping cart
#336921

Image for Illustration purposes only. Actual product may vary

  • BRAND:
  • SKU: 336921
  • CONDITION: NEW
  • MODEL: 7HS

TBWOODS 7HS 7HS SPLIT HYTREL SF SLEEVE

$98.67 Each

NEW

  • Typically ships in: 1 day
  • Weight: 0.7 lb
  • Free shipping on orders over $20

Select Quantity

Additional Description

Specifications
UPC698672660327
Unit Of MeasureEnglish
Coupling Size7
Component Weight lbs0.69
Component WR2 lbs ft20.0141
DescriptionOur new Sure-Flex Plus EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
Family ID2,005
Family NameSure-Flex Plus Coupling
HP Rating 100 RPM4.6
HP Rating 1150 RPM52.0
HP Rating 1200 RPM55.0
HP Rating 1750 RPM80.0
HP Rating 1800 RPM82.0
HP Rating 300 RPM14.0
HP Rating 3450 RPM157.0
HP Rating 3600 RPM157.0
HP Rating 50 RPM2.3
HP Rating 690 RPM31.0
HP Rating 870 RPM40.0
Insert DesignTwo-Piece Split
Max RPM rpm5,250
Maximum Angular Gap Misalignment0.02
Maximum Angular Misalignment1/4 Degree
Maximum Parallel Misalignment in0.012
Outside Diameter D Frac in4.343750
Product FamilySure-Flex Sleeve
Product Description7HS Hytrel Sleeve, Split Construction
Stiffness20,000
Temperature Rating-65ºF to +250ºF
Torque Rate in lbs2875
Width W Frac in2.187500

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html

3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 

--

Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf

Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.

 

Product's availability

State of California Proposition 65 Product Warning