Add products to your shopping cart



Image for Illustration purposes only. Actual product may vary

  • Brand:
  • Model: 6HS
  • Condition: NEW
  • SKU: 337185


View additional description
  • Typically ships in: 1 day
  • Weight: 0.4 lb
  • Contact supplier for technical support on: 888-829-6637

$70.79 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Additional Description

UPC 698672660310
Unit Of Measure English
Coupling Size 6
Component Weight lbs 0.44
Component WR2 lbs ft2 0.0066
Description Our new Sure-Flex Plus EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
Family ID 2,005
Family Name Sure-Flex Plus Coupling
HP Rating 100 RPM 2.9
HP Rating 1150 RPM 33.0
HP Rating 1200 RPM 34.0
HP Rating 1750 RPM 50.0
HP Rating 1800 RPM 51.0
HP Rating 300 RPM 8.6
HP Rating 3450 RPM 99.0
HP Rating 3600 RPM 99.0
HP Rating 50 RPM 1.4
HP Rating 690 RPM 20.0
HP Rating 870 RPM 25.0
Insert Design Two-Piece Split
Max RPM rpm 6,000
Maximum Angular Gap Misalignment 0.016
Maximum Angular Misalignment 1/4 Degree
Maximum Parallel Misalignment in 0.01
Outside Diameter D Frac in 3.750000
Product Family Sure-Flex Sleeve
Product Description 6HS Hytrel Sleeve, Split Construction
Stiffness 10,000
Temperature Rating -65ºF to +250ºF
Torque Rate in lbs 1800
Width W Frac in 1.875000

SKU: 832766

Didn’t use yet

I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.

Read more

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.


3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 


Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.


Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.


Product's availability

State of California Proposition 65 Product Warning