Categories

Add products to your shopping cart

Subtotal

View cart
  • BRAND: TB Woods
  • SKU: 338533
  • CONDITION: NEW
  • MODEL: 8S1316

TBWOODS 8S1316 8SX1 3/16 SF FLANGE

$33.51 Each

NEW

  • Free shipping on orders over $20
  • Typically ships in: 1 day
  • Weight: 4.4 lb

Select Quantity (minimum 3)

Additional Description

Specifications
UPC698672640503
Unit Of MeasureEnglish
Material TypeHigh Strength cast iron
Coupling Size8
Bore Size Frac in1.187500
Bore Tolerance in+.0005 to +.0015
Component Weight lbs4.4
Component WR2 lbs ft20.1041
DescriptionOur new Sure-Flex® Plus EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
Family ID2,005
Family NameSure-Flex® Plus Coupling
Keyseat Size in1/4 X 1/8
Length Through Bore C Frac in2.093750
Max RPM rpm4,500
Maximum Angular Gap Misalignment0.094 with EPDM/Neoprene Sleeves and 0.025 with Hytrel Sleeves
Maximum Angular Misalignment1 Degree with EPDM/Neoprene Sleeves and 1/4 Degree with Hytrel Sleeves
Maximum Parallel Misalignment in0.020 with EPDM/Neoprene Sleeves and 0.015 with Hytrel Sleeves
Outside Diameter D Frac in5.450000
Product FamilySure-Flex Type S, BTS Flange
Set Screw Distance S Frac in0.375000
Product Description8S x 1-3/16'' BTS Flange
Setscrew Length Frac in0.750000
Setscrew Size Location3/8-16 UNC, One over KS and @ 90 Degrees
Setscrew Torque Requirement ft lbs23
SF Flance Length T Frac in0.906250
SF Hub Diameter H Frac in3.250000
SF Hub Length E Frac in0.750000

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html

3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 

--

Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf

Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.

 

Product's availability

State of California Proposition 65 Product Warning