Add products to your shopping cart



Image for Illustration purposes only. Actual product may vary

  • Brand:
  • Model: 10JS
  • Condition: NEW
  • SKU: 338704


  • Typically ships in: 1 day
  • Weight: 2.3 lb
  • Contact supplier for technical support on: 888-829-6637

$49.34 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Additional Description

Unit Of MeasureEnglish
Coupling Size10
Component Weight lbs2.32
Component WR2 lbs ft20.1180
DescriptionOur new Sure-Flex Plus EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
Family ID2,005
Family NameSure-Flex Plus Coupling
HP Rating 100 RPM5.9
HP Rating 1150 RPM68.0
HP Rating 1200 RPM71.0
HP Rating 1750 RPM104.0
HP Rating 1800 RPM107.0
HP Rating 300 RPM18.0
HP Rating 3450 RPM204.0
HP Rating 3600 RPM213.0
HP Rating 50 RPM3.0
HP Rating 690 RPM41.0
HP Rating 870 RPM52.0
Insert DesignOne-Piece Split
Max RPM rpm3,600
Maximum Angular Gap Misalignment0.128
Maximum Angular Misalignment1 Degree
Maximum Parallel Misalignment in0.025
Outside Diameter D Frac in7.062500
Product FamilySure-Flex Sleeve
Product Description10JES EPDM Sleeve, Split Construction
Temperature Rating-30ºF to +275ºF
Torque Rate in lbs3735
Width W Frac in3.437500

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.


3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 


Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.


Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.


Product's availability

State of California Proposition 65 Product Warning