Image for Illustration purposes only. Actual product may vary
TBWOODS 7SMPB 7SX5/8 MPB SF FLANGE
MODEL 7SMPB
This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 888-829-6637
$37.93 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Brand Minimum Order Quantity: 2
Typically Ships in: 1 day
Returnable: See conditions
Still Deciding?
Add this item to your saved items and easily come back later.
Bore size
5/8 in
Maximum angular misalignment
1 Degree with EPDM/Neoprene Sleeves and 1/4 Degree with Hytrel Sleeves
Maximum angular gap misalignment
0.081 with EPDM/Neoprene Sleeves and 0.020 with Hytrel Sleeves
Product family
Sure-Flex Type S, BTS Flange
Setscrew size location
5/16 18 UNC, One over KS and at 90 degrees
Product description
7S x 5/8 in BTS Flange, No Keyseat
SF flange length
0.6875
SF hub length
20
Torque rate (in lbs)
940 with EPDM or Neoprene sleeve, 2875 with Hytrel sleeve
Keyseat size (in)
No KS, Suitable for reboring
Setscrew size, location
5/16 18 UNC, One over KS and at 90 degrees
Max speed
5250
Setscrew length
0.75
Max angular gap misalignment
0.081 (in) with EPDM/Neoprene Sleeves and 0.020 (in) with Hytrel Sleeves
SF flance length T frac (in)
0.687500
Material type
High Strength cast iron
Horsepower Rating at 100 RPM
50
Min compatible bore size
0.625
Power rating at 100 RPM
1.1 kW with EPDM or Neoprene sleeve, 3.4 kW with Hytrel sleeve
Screw size
Setscrew
Bore size frac (in)
0.625000
SF hub length E frac (in)
1.000000
Max parallel misalignment
7
Component WR2 (lbs ft2)
0.0471
Setscrew torque requirement (ft lbs)
13
Set screw distance S frac (in)
0.375000
Screw type
Flange, Type S
Length through bore C frac (in)
1.843750
Max RPM
5,250
Torque rate
940 (in-lbs) with EPDM or Neoprene sleeve; 2,875 (in-lbs) with Hytrel sleeve
Outside diameter
4.625
Set screw distance
0.375
Bore tolerance (in)
+.0005 to +.0015
Max angular misalignment
1 with EPDM/neoprene sleeves and 1/4 with hytrel sleeves
Setscrew torque requirement
13
SF hub diameter
2.8125
Construction type
Finish bore
Family ID
2,005
Bore tolerance
+.0005 to +.0015
Max compatible bore size
1.875
Length through bore
1.84375
Coupling size
7
Family name
Sure-Flex Plus Coupling
Torque
940 in-lb with EPDM or Neoprene sleeve, 2,875 in-lb with Hytrel sleeve
Setscrew length frac (in)
0.750000
Component WR
0.0471
Outside diameter D frac (in)
4.625000
Keyseat size
No KS, Suitable for reboring
Flange diameter
4.625
SF hub diameter H frac (in)
2.812500
Unit Of Measure
English
Maximum parallel misalignment (in)
0.020 with EPDM/Neoprene Sleeves and 0.012 with Hytrel Sleeves
Description: Our new Sure-Flex Plus EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreSKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.