Add products to your shopping cart



Image for Illustration purposes only. Actual product may vary

  • Brand:
  • Model: 8SC50
  • Condition: NEW
  • SKU: 341637


  • Typically ships in: 1 day
  • Weight: 4.8 lb
  • Contact supplier for technical support on: 888-829-6637

$62.49 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Additional Description

Unit Of MeasureEnglish
Material TypeHigh Strength Cast Iron
Coupling Size8
Component Weight lbs4.8
Component WR2 lbs ft20.1049
DescriptionOur new Sure-Flex Plus EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
Distance Between Shaft5.000000
Family ID2,005
Family NameSure-Flex Plus Coupling
Length L in2.375000
Max RPM rpm4,500
Maximum Angular Gap Misalignment0.094 with EPDM/Neoprene Sleeves and 0.025 with Hytrel Sleeves
Maximum Angular Misalignment1 Degree with EPDM/Neoprene Sleeves and 1/4 Degree with Hytrel Sleeves
Maximum Parallel Misalignment in0.020 with EPDM/Neoprene Sleeves and 0.015 with Hytrel Sleeves
Outside Diameter D Frac in5.450000
Product FamilySure-Flex Type SC, Spacer Flange
Product Description8SC50 Spacer Flange
SF Flance Length T Frac in0.906250
SF Hub Diameter H Frac in3.250000
SF Hub Length E Frac in1.031250
Spacer Hub Required8SCH x bore Spacer Hub
Torque Rate in lbs1475 with EPDM or Neoprene sleeve, 4530 with Hytrel sleeve

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.


3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 


Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.


Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.


Product's availability

State of California Proposition 65 Product Warning