Categories

Add products to your shopping cart

#1404790

CJ646B

Image for Illustration purposes only. Actual product may vary

Curtis CJ646B Outer Diameter: 1" alloy steel single joint with hubs bored 1/2 of O.D.

View additional description
  • Typically ships in: 3 days
  • Weight: 0.5 lb
  • Contact supplier for technical support on: 800-466-2144

$77.94 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Return policy

Item must be unused.

Item must be in it's original package.

Product's availability

State of California Proposition 65 Product Warning

Return policy

Item must be unused.

Item must be in it's original package.

Product's availability

State of California Proposition 65 Product Warning

Additional Description

Curtis supplies and stocks a complete line of standard bored joints in all 14 sizes. Standard bores are ½ of the O.D. The Curtis Take-Apart advantage allows the hubs on 78” diameter and larger joints to be economically machined or reworked per customer specifications.

Curtis Alloy Steel Joints feature 4140-grade steel for all forks. Forks of 78 inch diameter and larger have induction-hardened bearing areas for strength and durability. The body (hubs) of the joints remain in an annealed state, which affords free machinability. Center blocks and pins are machined from 8620 alloy steel and are carburized and case hardened to generate superior wear characteristics yet remain ductile, thereby enabling the joint to handle shock loads without experiencing premature failure. Universal joint hub modifications are available per customer specifications, which include but not limited to bores, keyways, set screw holes, cross pin holes, squares, hexes and splines. For assistance in ordering your universal joints, please refer to Curtis’ how to order instructions or contact the Curtis sales department for more information.

Universal Applications

  • Stock Car Racers
  • Nuclear Installations
  • Tractor Attachments
  • In-Plant Utility Vehicles
  • Grain Augers

Also available in 303 stainless steel.

  DIMENSIONS OF STANDARD JOINTS IN INCHES BREAKING LOADS  
"A" "B" "C" "C/2" "D" "E" Static
Torque
Rating
Compression
or Tension
Load
Approximate
Weight
Catalog
Number
Outside
Diameter
Bore
Diameter
Total
Length
Centerline
to
End
Hub
Length
Shaft to
Shaft
Distance
  + .000
- .003
± .001 ± .020
± .030 *
± .010
± .015 *
± .015   Inch
Pounds
Pounds Pounds
CJ646B 1.000 0.5000 3.375 1.688 1.188 1.000 3050 5600 0.50
Notes:
  1. Large bearing pin is provided with an oil passage. 1.00" through 4.00" diameter joints are also fitted with a ball spring oil fitting to retain lubricant.
  2. Curtis standard single universal joints will operate through angles of 35. For applications requiring greater angles, special design can be employed, enabling the joint to operate at angles up to 45.
  3. Joints are permanently assembled with small bearing pin riveted in place.