The Lovejoy Oldham coupling is a precision engineered, torsionally stiff, three-piece coupling suitable for a great many
applications ranging from incremental control of fluid valves to highly dynamic drives in closed loop servo systems. It
accommodates misalignment mechanically through a floating disc that engages tenons machined out of the hubs. As the coupling rotates, the floating disc aligns with each hub alternately to an extent demanded by the alignment error.
Because parallel misalignment is accommodated by lateral displacement, the Lovejoy Oldham coupling can handle severe
alignment errors within a short space envelope. This is a valuable feature in densely packaged and blind assemblies, or
where misalignment can accelerate the erosion of shaft bearings.
The Lovejoy Oldham coupling features raised dots on both sides of the floating disc which act as an effective spacer. The
dots keep the face of the tenon from contacting the bottom of the floating disc and allows the coupling greater angular
misalignment capability. A very important effect is that the spacer dots will greatly reduce the bending load on the shafts
because of the freedom of the floating disc.
The MOL Coupling consists of two hubs and one center member.
|Description||MOL32 HUB 7/16 N/KW|
|Coupling Type||Oldham, Three Piece Design w/ Insert|
|Weight (Complete Coupling w/ Min. Bores)||1.90 oz|
|Bore Size||7/16 in|
|Set Screw Size||M6|
|Keyway Size||No Keyway|
|Length thru Bore||0.512 in13.00 mm|
|Outside Diameter||1.260 in32.00 mm|
|Overall Coupling Length||1.299 in33.00 mm|
|Min. Bore (Dimensions ID1/ID2)||0.315 in8.00 mm|
|Max. Bore (Dimensions ID1/ID2)||0.551 in14.00 mm|
|Cubic inches||0.81285 in³|
|Max. Operating Temperature||176.00 ºF|
|Nominal Torque||39.80 in·lb|
|Max Speed||1200.00 rpm|
|Angular Misalignment||3.00 º|
|Parallel Misalignment||0.100 in|
|Torsional Stiffness||8788.00 in·lb/rad|
|Moment of Inertia||0.025 lb·in²|
- High torsional stiffness
- Maximum temperature 176° F (80° C)
- Aluminum hubs with a Polyacetal insert
- Available in setscrew or clamping style hubs
- Nominal torque, torsional stiffness, weight and moment of inertia are based on minimum bore size.
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may applied to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/