MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
VEM3770T 7.5HP, 1770RPM, 3PH, 60HZ, 213TC, 0735M, TEFC
MODEL VEM3770T
Contact supplier for technical support on: 323 724 6771
$2,011.55 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient Temperature
40 °C
Base Indicator
No Mounting
Conduit Box Material
Cast Iron
Design Code
A
Duty Rating
CONT
Enclosure
TEFC
Frame
213TC
Frame Material
Iron
HP
7.5
Hz
60
Insulation Class
F
Inverter Code
Inverter Ready
Motor Standards
NEMA
Motor Weight
170
Mounting Arrangement
F1
Number of Poles
4
Overall Length
19.2 in
Phase
3
Power Factor
81
Pulley Face Code
C-FACE
RPM
1700 - 1800
Service Factor
1.15
Shaft Diameter
1.375IN
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
1800
Voltage
230/460
| Output | 7. 5 |
|---|---|
| RPM | 1770 |
| Pallet Quantity | 6 |
| Specification Number | 07G082X790 |
| Frame | 213TC |
| Weight | 170. 000 LB |
| Multiplier | L1 |
| Enclosure | TEFC |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 230/460 |
| Poles | 04 |
| Class | STOCK |
| Type | 0735M |
| Status | Active |
| Commodity Code | 8501. 52. 4000 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | F |
|---|---|
| Status | PRD/A |
| Change # | 783705 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 0735M |
| Elec. Spec | 07WGX790 |
| CD Diagram | CD0005 |
| Enclosure | TEFC |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 07G082 |
| Layout | 07LYG082 |
| Frame | 213TC |
| Mounting | F1 |
| Poles | 04 |
| Created Date | |
| Base | N |
| Rotation | R |
| Insulation | F |
| Eff. Date | 2/1/2013 |
| Leads | 9#14 |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for VEM3770T
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 07G082X790 | BALDOR/FT SMITH/REC WHSE #5 | 9/2/2005 | 35M 4P TEFC VER 213TC SUPER-E | |
| 07G082W721 | BALDOR/FT SMITH/REC WHSE #5 | 8/5/2005 | 40M 4P TEFC VER 213TC SUPER-E | |
| 07G082W721 | BALDOR/FT SMITH/REC WHSE #5 | 10/26/2001 | 40M 4P TEFC VER 213TC SUPER-E | |
| 07G82W35 | BALDOR/FT SMITH/REC WHSE #5 | 8/10/1999 | 35M 4P TEFC VER 213TC SUPER-E | |
| 07G82W35 | BALDOR/FT SMITH/REC WHSE #5 | 6/9/1999 | 35M 4P TEFC VER 213TC SUPER-E |
| Nameplate No. | NP1259L |
|---|---|
| CAT. NO. | VEM3770T |
| SPEC. | 07G082X790 |
| HP | 7. 5 |
| VOLTS | 230/460 |
| AMP | 19/9. 5 |
| RPM | 1770 |
| FRAME | 213TC |
| HZ | 60 |
| PH | 3 |
| SER. F. | 1. 15 |
| CODE | J |
| DES | A |
| CL | F |
| NEMA-NOM-EFF | 91. 7 |
| PF | 81 |
| RATING | 40C AMB-CONT |
| CC | 010A |
| USABLE AT 208V | |
| DE | 6307 |
| ODE | 6206 |
| ENCL | TEFC |
| SN | |
General Characteristics
| Full Load Torque | 22. 2 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 4. 18 Amps |
| Break-Down Torque | 69. 8 LB-FT |
| Line-line Res. @ 25°C. | 1. 43 Ohms A Ph / 0 Ohms B Ph |
| Pull-Up Torque | 34. 3 LB-FT |
| Temp. Rise @ Rated Load | 42°C |
| Locked-Rotor Torque | 42. 2 LB-FT |
| Temp. Rise @ S. F. Load | 52°C |
| Starting Current | 68 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 43 | 65 | 76 | 81 | 83 | 84 | 82 |
| Efficiency | 87. 4 | 91. 6 | 92. 3 | 92 | 91. 2 | 90. 1 | 91. 5 |
| Speed (RPM) | 1792 | 1784 | 1777 | 1769 | 1760 | 1750 | 1764 |
| Line Amperes | 4. 68 | 5. 93 | 7. 53 | 9. 44 | 11. 6 | 13. 9 | 10. 7 |
General Characteristics
| Full Load Torque | 22. 1 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 4. 18 Amps |
| Break-Down Torque | 69. 8 LB-FT |
| Line-line Res. @ 25°C. | 1. 43 Ohms A Ph / 0 Ohms B Ph |
| Pull-Up Torque | 34. 3 LB-FT |
| Temp. Rise @ Rated Load | 42°C |
| Locked-Rotor Torque | 42. 2 LB-FT |
| Temp. Rise @ S. F. Load | 52°C |
| Starting Current | 68 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 43 | 65 | 76 | 81 | 83 | 84 | 82 |
| Efficiency | 87. 4 | 91. 6 | 92. 3 | 92 | 91. 2 | 90. 1 | 91. 5 |
| Speed (RPM) | 1792 | 1784 | 1777 | 1769 | 1760 | 1750 | 1764 |
| Line Amperes | 4. 68 | 5. 93 | 7. 53 | 9. 44 | 11. 6 | 13. 9 | 10. 7 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA194639 | SA 07G082Y729G1 | 1 EA |
| RA182225 | RA 07G082Y729G1 | 1 EA |
| 37FN3002C01 | EXFN, PLASTIC, 6. 00 OD, 1. 155 ID | 1 EA |
| S/P107-000-001 | SUPER E PROC'S-FS & WS PLTS-POLYREX EM G | 1 EA |
| HW3201A05 | 3/8-16 EYEBOLT | 1 EA |
| 09CB3002SP | CB W/1. 38 LEAD HOLE FOR 37, 39, 307 & 30 | 1 EA |
| 09GS1000SP | GASKET-CONDUIT BOX, 1/16 THICK LEXIDE | 1 EA |
| 51XW2520A12 | . 25-20 X. 75, TAPTITE II, HEX WSHR SLTD | 2 EA |
| WD1000B17 | KPA-8C BURNDY TERMINAL | 1 EA |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| HW3001B01 | 003SS CUP WASHER, FOR #8 SCREW | 1 EA |
| 37EP1100A41 | FR ENDPLATE MACH FOR GREASER & RELIEF | 1 EA |
| HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| HW5100A06 | W2420-025 WVY WSHR (WB) | 1 EA |
| 37EP1300A10 | FACE MTD EP, 307BRG, 213-5TC, GRSR, RELIEF & | 1 EA |
| HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| 10XN2520A30 | HEX HD CAP SCREW-STD THD-. 25 X 20 THD PE | 4 EA |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT. 493 OD, . 255 I | 4 EA |
| XY3118A12 | 5/16-18 HEX NUT DIRECTIONAL SERRATION | 4 EA |
| 51XB1214A20 | 12-14X1. 25 HXWSSLD SERTYB | 1 EA |
| 07FH4007SP | IEC FH W/GRSR, NOTCH @ 6: 00 & 3 FAN CVR | 1 EA |
| 51XW1032A06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD S | 3 EA |
| 09CB3501SP | CONDUIT BOX LID FOR 09CB3001 & 09CB3002 | 1 EA |
| 09GS1013SP | 09 GS FOR 09CB3501 LID - LEXIDE | 1 EA |
| 51XW2520A12 | . 25-20 X. 75, TAPTITE II, HEX WSHR SLTD | 2 EA |
| HW2501F21 | KEY, 5/16 SQ X 2. 375 | 1 EA |
| HA7000A02 | KEY RETAINER RING, 1 1/8 DIA, 1 3/8 DIA | 1 EA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| LB1115 | LABEL, LIFTING DEVICE | 1 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB |
| HA3104A32 | THRUBOLT- 5/16-18 X12. 750 | 4 EA |
| MG1000Y03 | WILKO 689. 710 GOLD PAINT SUPER E | 0. 036 GA |
| LB1119 | WARNING LABEL | 1 EA |
| LB1125C02 | SUPER-E (STOCK CTN LABEL SUPER-E WITH FL | 1 EA |
| LC0006 | CONNECTION LABEL | 1 EA |
| NP1259L | ALUM SUPER-E UL CSA-EEV CC NEMA PREMIUM | 1 EA |
| 07PA1011 | PKG GRP, 07 CAST IRON PK1181 | 1 EA |
| 07PA1095 | PKG GRP, VER 07 CAST IRON | 1 EA |
SKU: 2833706
Replacement motor
I ordered this motor on Wednesday and received it on Thursday by truck, fantastic shipping and very good pricing.
Read moreSKU: 27348
Baldor ga16 pedestal
As specified. Prompt delivery of two pedestals. No problems. Excellent in every regard.
Read moreSKU: 25710
Exellent value, prizes
One of the best companies I have purchased equipment from. Low prices fast shipping. Best customer service.What else do I need.
Read more
#24367
Brand
Baldor
Model
VEM3770T
#699717
Brand
Baldor
Model
VEM3774T-5
#2840816
Brand
Baldor
Model
VEM8005T
#699715
Brand
Baldor
Model
VEM3714T
#699716
Brand
Baldor
Model
VEM3714T-5
#24699
Brand
Baldor
Model
EM3710T
#24487
Brand
Baldor
Model
EM3770T
#1312228
Brand
WEG
Model
00718ET3E213T-W22
#5050070
Brand
Teco-Westinghouse
Model
NP7/54
#5772481
Brand
Marathon Electric
Model
GT1016A
#699712
Brand
Baldor
Model
VEM3710T
#24282
Brand
Baldor
Model
ECP3770T
#2548760
Brand
Baldor
Model
EM3710T-BG
| Brand | US Motors |
| Model | HW10V3E |
| Brand | Lubriplate |
| Model | L0043-040 |
| Brand | Boston Gear |
| Model | SSHF7210-7.5KCT-B5-HS2-P20 |
| Brand | SKF Seals |
| Model | 31281 |
| Brand | Dodge |
| Model | 070861 |
| Brand | Dodge |
| Model | 071311 |
| Brand | NTN Bearing |
| Model | 22213EADC3 |
| Brand | Consolidated Bearings |
| Model | NN-3015-KMS P/5 |
SKU: 2833706
Replacement motor
I ordered this motor on Wednesday and received it on Thursday by truck, fantastic shipping and very good pricing.
Read moreSKU: 27348
Baldor ga16 pedestal
As specified. Prompt delivery of two pedestals. No problems. Excellent in every regard.
Read moreSKU: 25710
Exellent value, prizes
One of the best companies I have purchased equipment from. Low prices fast shipping. Best customer service.What else do I need.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/