MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
$1,100.28 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient Temperature
40 °C
Base Indicator
Rigid
Conduit Box Material
Steel
Design Code
L
Duty Rating
CONT
Enclosure
TEFC
Frame
56C
Frame Material
Steel
HP
1.5
Hz
60
Insulation Class
F
Inverter Code
Not Inverter
Motor Standards
NEMA
Motor Weight
54
Mounting Arrangement
F1
Number of Poles
4
Overall Length
14.1 in
Phase
1
Power Factor
98
Pulley Face Code
C-FACE
RPM
1700 - 1800
Service Factor
1.15
Shaft Diameter
0.625IN
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
1800
Voltage
115-230
| Output | 1. 5 |
|---|---|
| RPM | 1725 |
| Pallet Quantity | 35 |
| Specification Number | 35K358Y860 |
| Frame | 56C |
| Weight | 54. 000 LB |
| Multiplier | K |
| Enclosure | TEFC |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 115/230 |
| Poles | 04 |
| Class | STOCK |
| Type | 3535LC |
| Status | Active |
| Commodity Code | 8501. 40. 6040 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | AR |
|---|---|
| Status | PRD/A |
| Change # | 773866 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 3535LC |
| Elec. Spec | 35WGY860 |
| CD Diagram | CD0016A02 |
| Enclosure | TEFC |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 35K358 |
| Layout | 35LYK358 |
| Frame | 56C |
| Mounting | F1 |
| Poles | 04 |
| Created Date | |
| Base | RG |
| Rotation | R |
| Insulation | B |
| Eff. Date | 11/28/2012 |
| Leads | 7#18, 1#14 #4TH |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for PCL3514M
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 35K358Y860 | BALDOR/FT SMITH/REC WHSE #5 | 8/10/1999 | 35LC 4P TEFC HOR 56C MTO |
| Nameplate No. | NP1257L |
|---|---|
| CAT. NO. | PCL3514M |
| SPEC. | 35K358Y860 |
| HP | 1. 5 |
| VOLTS | 115/230 |
| AMP | 14/6 |
| RPM | 1725 |
| FRAME | 56C |
| HZ | 60 |
| PH | 1 |
| SER. F. | 1. 15 |
| CODE | J |
| DES | L |
| CL | B |
| NEMA-NOM-EFF | 82. 5 |
| PF | 98 |
| RATING | 40C AMB-CONT |
| CC | |
| USABLE AT 208V | |
| DE | 6205 |
| ODE | 6203 |
| ENCL | TEFC |
| SN | |
General Characteristics
| Full Load Torque | 4. 5 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 1. 3 Amps |
| Break-Down Torque | 12. 5 LB-FT |
| Line-line Res. @ 25°C. | 1. 7 Ohms A Ph / 2. 03 Ohms B Ph |
| Pull-Up Torque | 5 LB-FT |
| Temp. Rise @ Rated Load | 60°C |
| Locked-Rotor Torque | 10 LB-FT |
| Temp. Rise @ S. F. Load | 66°C |
| Starting Current | 50 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 97 | 99 | 99 | 97 | 94 | 92 | 95 |
| Efficiency | 54 | 70 | 77 | 80 | 81 | 80 | 80. 6 |
| Speed (RPM) | 1787 | 1776 | 1765 | 1752 | 1738 | 1721 | 1744 |
| Line Amperes | 2. 3 | 3. 3 | 4. 8 | 6. 3 | 7. 9 | 9. 8 | 7. 26 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA111044 | SA 35T973Y691 | 1 EA |
| RA102423 | RA 35T973Y691 | 1 EA |
| OC3060C09 | CYL OIL CAP 60MFD/240V | 1 EA |
| TPCRJ51CB | THERMAL 1PH 1. 00 MAN 120C | 1 EA |
| EC1400A03SP | ELEC CAP, 400-480 MFD, 125V, 1. 81D X 3. | 1 EA |
| WD3006A01 | RSS-2-103JT 2W 10K RES. METAL OXIDE 5% | 1 EA |
| NS2512A01 | INSULATOR, CONDUIT BOX X | 1 EA |
| 35CB3007A17 | 35 CB. 88 DIA @ 6: 00, 1. 00 MTO @ 3: 00 | 1 EA |
| 36GS1000SP | GASKET-CONDUIT BOX, . 06 THICK #SV-330 LE | 1 EA |
| 51XB1016A07 | 10-16 X 7/16 HXWSSLD SERTYB | 2 EA |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 2 EA |
| 35EP3100M02 | FREP TEFC 203 BRG W/O GRSR (RAISED FH MT | 1 EA |
| NS2501A02 | INSULATOR, CAPACITOR BOX | 1 EA |
| 35CB3801SP | CAPACITOR COVER, CAST | 1 EA |
| 34GS3002 | GASKET, CAPACITOR BOX | 1 EA |
| 51XB1016A08 | 10-16X 1/2HXWSSLD SERTYB | 2 EA |
| HA7010 | CAPACITOR RETENTION CLAMP | 1 EA |
| HW5100A03SP | WAVY WASHER (W1543-017) | 1 EA |
| 35EP3300A33 | SPL FACE MTD EP -ENCL-205 BRG | 1 EA |
| 51XN1032A20 | 10-32 X 1 1/4 HX WS SL SR | 2 EA |
| 35FN3002A05SP | EXFN, PLASTIC, 6. 376 OD, . 638 ID | 1 EA |
| 51XB1214A16 | 12-14X1. 00 HXWSSLD SERTYB | 1 EA |
| 51XW1032A06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD S | 3 EA |
| 35GS1030 | 35 GS FOR CB LID - LEXIDE | 1 EA |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 4 EA |
| HW2501D13SP | KEY, 3/16 SQ X 1. 375 | 1 EA |
| HA7000A04 | KEY RETAINER 0. 625 DIA SHAFTS | 1 EA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| WD1000A15 | 3-520132-2 AMP FLAG (4M/RL NON-CANC/NON- | 4 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB |
| 35FH4005A32SP | IEC FH NO GRSR W/3 HOLES - W/AUTOPHERETI | 1 EA |
| 35CB4521 | 35 LIPPED CB LID (GALV & PHOSPH) | 1 EA |
| MG1000G27 | PAINT- S9282E CHARCOAL GREY | 0. 017 GA |
| HA3100A15 | THRUBOLT 10-32 X 8. 375 | 4 EA |
| MG2000A02 | RUST VETO-377-HF HOUGHTON | 0. 001 GA |
| SP5181A28 | MODEL 35 LC TORQ STAT SWITCH LEAD ASSY | 1 EA |
| LB1119 | WARNING LABEL | 1 EA |
| LB1125C01 | STD (STOCK) CARTON LABEL BALDOR WITH FLA | 1 EA |
| LC0269 | 1PH, DV, REV, THERMAL, 7 LD, L. AMP THRU HTR H | 1 EA |
| LB1087 | LABEL, MANUAL RESET (ROLL LABEL) | 1 EA |
| NP1257L | ALUM UL CSA CC THERMAL REV MTG | 1 EA |
| 35PA1066 | PACKING GROUP COMBINED PRINT | 1 EA |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
SKU: 2833706
Replacement motor
I ordered this motor on Wednesday and received it on Thursday by truck, fantastic shipping and very good pricing.
Read more
#2525425
Brand
Leeson
Model
110089.00
#25810
Brand
Baldor
Model
CL3514
#25722
Brand
Baldor
Model
FDL3514M
#2525533
Brand
Leeson
Model
110910.00
#25740
Brand
Baldor
Model
L3514M
#2853246
Brand
WEG
Model
00158ES1B56-S
#2270251
Brand
Leeson
Model
F105
| Brand | Saginaw Control |
| Model | SCE-1614ELJSS |
SKU: 2833706
Replacement motor
I ordered this motor on Wednesday and received it on Thursday by truck, fantastic shipping and very good pricing.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/