Image for Illustration purposes only. Actual product may vary
L1405T 2HP, 1725RPM, 1PH, 60HZ, 182T, 3628L, OPEN, F1
MODEL L1405T
Contact supplier for technical support on: 323 724 6771
$973.25 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable:No
Ambient Temperature
40 °C
Base Indicator
Rigid
Conduit Box Material
Steel
Design Code
L
Duty Rating
CONT
Enclosure
OPEN
Frame
182T
Frame Material
Steel
HP
2
Hz
60
Insulation Class
F
Inverter Code
Not Inverter
Motor Standards
NEMA
Motor Weight
66
Mounting Arrangement
F1
Number of Poles
4
Overall Length
15 in
Phase
1
Power Factor
68
Pulley Face Code
STANDARD
RPM
1700 - 1800
Service Factor
1.15
Shaft Diameter
1.125IN
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
1800
Voltage
115-230
| Output | 2 |
|---|---|
| RPM | 1725 |
| Pallet Quantity | 20 |
| Specification Number | 36D01-117 |
| Frame | 182T |
| Weight | 66. 000 LB |
| Multiplier | L1 |
| Enclosure | OPEN |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 115/230 |
| Poles | 04 |
| Class | STOCK |
| Type | 3628L |
| Status | Active |
| Commodity Code | 8501. 40. 6040 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | W |
|---|---|
| Status | PRD/A |
| Change # | 593672 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 3628L |
| Elec. Spec | 36WG0117 |
| CD Diagram | CD0001 |
| Enclosure | OPEN |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 36D001 |
| Layout | 36LYD001 |
| Frame | 182T |
| Mounting | F1 |
| Poles | 04 |
| Created Date | |
| Base | RG |
| Rotation | R |
| Insulation | B |
| Eff. Date | 5/5/2011 |
| Leads | 4#14 A PH, 2#16 B PH |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for L1405T
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 36D01-117 | BALDOR/FT SMITH/REC WHSE #5 | 8/10/1999 | 28L 4P OPEN HOR 182T |
| Nameplate No. | NP1256L |
|---|---|
| CAT. NO. | L1405T |
| SPEC. | 36D01-117 |
| HP | 2 |
| VOLTS | 115/230 |
| AMP | 24/12 |
| RPM | 1725 |
| FRAME | 182T |
| HZ | 60 |
| PH | 1 |
| SER. F. | 1. 15 |
| CODE | J |
| DES | L |
| CLASS | B |
| NEMA-NOM-EFF | 71 |
| PF | 68 |
| RATING | 40C AMB-CONT |
| CC | |
| USABLE AT 208V | 12. 6 |
| DE | 6206 |
| ODE | 6205 |
| ENCL | OPEN |
| SN | |
General Characteristics
| Full Load Torque | 6 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 8. 5 Amps |
| Break-Down Torque | 16 LB-FT |
| Line-line Res. @ 25°C. | 0. 223 Ohms A Ph / 0. 977 Ohms B Ph |
| Pull-Up Torque | 10. 5 LB-FT |
| Temp. Rise @ Rated Load | 64°C |
| Locked-Rotor Torque | 18. 3 LB-FT |
| Temp. Rise @ S. F. Load | 82°C |
| Starting Current | 55 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 34 | 49 | 61 | 70 | 76 | 80 | 0 |
| Efficiency | 54. 4 | 68. 6 | 74 | 76. 1 | 76. 3 | 75. 4 | 0 |
| Speed (RPM) | 1786 | 1774 | 1761 | 1746 | 1730 | 1711 | 0 |
| Line Amperes | 8. 85 | 9. 6 | 10. 7 | 12. 2 | 14 | 16. 2 | 13. 3 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA034377 | SA 36D11-117 | 1 EA |
| RA030405 | RA 36D11-117 | 1 EA |
| 36CB3004 | 36 CB CASTING W/1. 09 DIA LEAD HOLE @ 6: 0 | 1 EA |
| 51XB1016A08 | 10-16X 1/2HXWSSLD SERTYB | 2 EA |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| HW3001B01 | 003SS CUP WASHER, FOR #8 SCREW | 1 EA |
| 36EP3200A01SP | FR ENDPLATE, MACH | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| 13XF0832A08 | 8-32 X. 50 PAN HD, SLTD, TYPE F SCREW, ZIN | 2 EA |
| NS2501A01 | INSULATOR, CAPACITOR | 1 EA |
| SP1008A01 | BAFFLE, MODEL 36 & 37 | 1 EA |
| 35CB4802A02SP | CAPACITOR COVER, STAMPED X W/AUTOPHORET | 1 EA |
| 51XB1016A05 | 10-16X5/16HX WA SL SR TYB (F/S) | 2 EA |
| HW5100A05 | WVY WSHR F/205 & 304 BRGS | 1 EA |
| 36EP3201A01 | PU ENDPLATE, MACH 182-4T | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| XY2520A12 | 1/4-20 HEX NUT, DIRECTIONAL SERRATIONS | 4 EA |
| 36CB4516 | 36 LIPPED CB LID | 1 EA |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 4 EA |
| HW2501D13SP | KEY, 3/16 SQ X 1. 375 | 1 EA |
| HA7000A01 | KEY RETAINER 7/8' DIA SHAFT | 1 EA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| WD1000A15 | 3-520132-2 AMP FLAG (4M/RL NON-CANC/NON- | 2 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB |
| MG1000G27 | PAINT- S9282E CHARCOAL GREY | 0. 022 GA |
| EC1850A06SP | ELEC CAP 115V 2. 0 X 4. 3 X | 1 EA |
| HA3101A25 | THRUBOLT 1/4-20 X 11. 000 OHIO ROD | 4 EA |
| SP5061A01 | MODEL 36 TYPE L, F1, SMALL CAP CAN | 1 EA |
| LB1125C01 | STD (STOCK) CARTON LABEL BALDOR WITH FLA | 1 EA |
| LC0001A01 | CONN LABEL / WARNING LABEL (LC0001 / LB1 | 1 EA |
| NP1256L | ALUM UL CSA CC | 1 EA |
| 36PA1000 | PACK GROUP W/LB5001 | 1 EA |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
Accesories
| Product Number | Description | Multiplier |
|---|---|---|
| 36-486 | C FACE KIT | A8 |
| 36EP1405A09SP | D-FLANGE KIT | A8 |
SKU: 25060
So fast
Every time I order one of these motors they come super fast. MRO is my go to motors
Read moreSKU: 26018
Great service!
We were really in a bind and MROSUPPLY had the product in stock for the best price and managed to get it out the same day!
Read moreSKU: 25904
Nobody does it better
Excellent professional service and great pricing. Best company I work with. People are supportive, knowledgeable and make my job easier. Great people and great company...MRO
Read moreBrand
Baldor
Model
L1405T
Brand
Baldor
Model
L1405T-50
Brand
Leeson
Model
131515.00
Brand
Baldor
Model
EL1405T
| Brand | Bestorq |
| Model | A173 |
| Brand | Stearns |
| Model | 845512000 |
| Brand | Baldor |
| Model | ECP3663T-4 |
| Brand | Hubbell Wiring |
| Model | SFSCSBKOW |
| Brand | Schunk |
| Model | 9799150 |
| Brand | RAB Lighting |
| Model | LOSBAY800 |
| Brand | Starrett |
| Model | 5002BZ-24/600 |
| Brand | Martin Sprocket |
| Model | MXT40 3 15/16 |
SKU: 25060
So fast
Every time I order one of these motors they come super fast. MRO is my go to motors
Read moreSKU: 26018
Great service!
We were really in a bind and MROSUPPLY had the product in stock for the best price and managed to get it out the same day!
Read moreSKU: 25904
Nobody does it better
Excellent professional service and great pricing. Best company I work with. People are supportive, knowledgeable and make my job easier. Great people and great company...MRO
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/