MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
VL1321T 1.5HP, 1725RPM, 1PH, 60HZ, 145TC, 3535L, OPEN
MODEL VL1321T
Contact supplier for technical support on: 323 724 6771
$957.90 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient Temperature
40 °C
Base Indicator
No Mounting
Conduit Box Material
Steel
Design Code
L
Duty Rating
CONT
Enclosure
OPEN
Frame
145TC
Frame Material
Steel
HP
1.5
Hz
60
Insulation Class
F
Inverter Code
Not Inverter
Motor Standards
NEMA
Motor Weight
48
Mounting Arrangement
F1
Number of Poles
4
Overall Length
15.54 in
Phase
1
Power Factor
80
Pulley Face Code
C-FACE
RPM
1700 - 1800
Service Factor
1.15
Shaft Diameter
0.875IN
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
1800
Voltage
115-230
| Output | 1. 5 |
|---|---|
| RPM | 1725 |
| Pallet Quantity | 35 |
| Specification Number | 35DD005W029 |
| Frame | 145TC |
| Weight | 48. 000 LB |
| Multiplier | L1 |
| Enclosure | OPEN |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 115/230 |
| Poles | 04 |
| Class | STOCK |
| Type | 3535L |
| Status | Active |
| Commodity Code | 8501. 40. 6040 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | C |
|---|---|
| Status | PRD/A |
| Change # | 777873 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 3535L |
| Elec. Spec | 35WGW029 |
| CD Diagram | CD0001 |
| Enclosure | OPEN |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 35DD005 |
| Layout | 35LYDD005 |
| Frame | 145TC |
| Mounting | F1 |
| Poles | 04 |
| Created Date | 12/22/2009 |
| Base | N |
| Rotation | R |
| Insulation | B |
| Eff. Date | 12/18/2012 |
| Leads | 4#14 A PH, 2#18 B PH |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for VL1321T
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 35DD005W029 | BALDOR/FT SMITH/REC WHSE #5 | 12/23/2009 | 35L 4P OPEN VER 145TC DRIP COVER & EXT | |
| 35D05W29 | BALDOR/FT SMITH/REC WHSE #5 | 8/10/1999 | 35L 4P OPEN VER 145TC DRIP COVER & EXT | |
| 35D05W29 | BALDOR/FT SMITH/REC WHSE #5 | 6/9/1999 | 35L 4P OPEN VER 145TC DRIP COVER & EXT |
| Nameplate No. | NP1256L |
|---|---|
| CAT. NO. | VL1321T |
| SPEC. | 35DD005W029 |
| HP | 1. 5 |
| VOLTS | 115/230 |
| AMP | 21/10. 5 |
| RPM | 1725 |
| FRAME | 145TC |
| HZ | 60 |
| PH | 1 |
| SER. F. | 1. 15 |
| CODE | M |
| DES | L |
| CLASS | B |
| NEMA-NOM-EFF | 70 |
| PF | 64 |
| RATING | 40C AMB-CONT |
| CC | |
| USABLE AT 208V | 11 |
| DE | 6205 |
| ODE | 6203 |
| ENCL | OPEN |
| SN | |
General Characteristics
| Full Load Torque | 4. 5 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 9. 3 Amps |
| Break-Down Torque | 16 LB-FT |
| Line-line Res. @ 25°C. | 1. 3 Ohms A Ph / 1. 09 Ohms B Ph |
| Pull-Up Torque | 12. 5 LB-FT |
| Temp. Rise @ Rated Load | 60°C |
| Locked-Rotor Torque | 15 LB-FT |
| Temp. Rise @ S. F. Load | 66°C |
| Starting Current | 74 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 29 | 42 | 54 | 64 | 71 | 76 | 68 |
| Efficiency | 46. 3 | 60. 8 | 67. 7 | 70. 1 | 71 | 70. 5 | 70. 6 |
| Speed (RPM) | 1790 | 1782 | 1772 | 1762 | 1751 | 1738 | 1755 |
| Line Amperes | 9. 3 | 9. 6 | 10. 1 | 11 | 12. 1 | 13. 6 | 11. 66 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA189059 | SA 35EE018X966 | 1 EA |
| RA176778 | RA 35EE018X966 | 1 EA |
| OC3015F12SP | CYL OIL CAP 15MFD/370V | 1 EA |
| EC1850A06SP | ELEC CAP 115V 2. 0 X 4. 3 X | 1 EA |
| NS2512A01 | INSULATOR, CONDUIT BOX X | 1 EA |
| 35CB3009 | 35 CB CASTING W/1. 09 DIA. LEAD HOLE @ 6: | 1 EA |
| 51XB1016A07 | 10-16 X 7/16 HXWSSLD SERTYB | 2 EA |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| 35EP3201A02 | FR ENDPLATE, MACH | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 2 EA |
| SP1006A01 | TERM. BOARD, MODE 35 SW X H-23655 | 1 EA |
| 35CB3801SP | CAPACITOR COVER, CAST | 1 EA |
| HA7010 | CAPACITOR RETENTION CLAMP | 1 EA |
| NS2501A02 | INSULATOR, CAPACITOR BOX | 1 EA |
| 51XB1016A08 | 10-16X 1/2HXWSSLD SERTYB | 2 EA |
| HW5100A03SP | WAVY WASHER (W1543-017) | 1 EA |
| 35EP3400A14 | SPL FACE MTD END PLATE - OPEN-143-5TC-05 | 1 EA |
| 35AD2000 | AIR BAFFLE | 1 EA |
| 60XW0632A06 | 6-32 X 3/8 TORX HEAD SCREW TAPTITE II | 4 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| 51XN1032A20 | 10-32 X 1 1/4 HX WS SL SR | 2 EA |
| 35FN3002A05SP | EXFN, PLASTIC, 6. 376 OD, . 638 ID | 1 EA |
| 51XB1214A16 | 12-14X1. 00 HXWSSLD SERTYB | 1 EA |
| 35FH4006A04 | DRIP COVER SPECIAL, W/ AUTOPHERETIC PRIM | 1 EA |
| 51XW1032A06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD S | 3 EA |
| 35CB4521 | 35 LIPPED CB LID (GALV & PHOSPH) | 1 EA |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 4 EA |
| HW2501D13SP | KEY, 3/16 SQ X 1. 375 | 1 EA |
| HA7000A01 | KEY RETAINER 7/8' DIA SHAFT | 1 EA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB |
| MG1000G27 | PAINT- S9282E CHARCOAL GREY | 0. 017 GA |
| HA3100A18 | THRUBOLT 10-32 X 9. 250 | 4 EA |
| WD1000A15 | 3-520132-2 AMP FLAG (4M/RL NON-CANC/NON- | 4 EA |
| 34GS5003 | FOAM SLEEVE, ID = 2 1/16' X 3 3/8' | 2 EA |
| SP5056A61 | MODEL 35 LC STATIONARY SWITCH LEAD ASSY | 1 EA |
| LB1119 | WARNING LABEL | 1 EA |
| LB1125C01 | STD (STOCK) CARTON LABEL BALDOR WITH FLA | 1 EA |
| LC0016 | CONNECTION LABEL | 1 EA |
| NP1256L | ALUM UL CSA CC | 1 EA |
| 35PA1066 | PACKING GROUP COMBINED PRINT | 1 EA |
| PK3082 | STYROFOAM CRADLE | 1 EA |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
SKU: 2840530
Baldor erm3108
This motor is a little bit, maybe a half inch longer than the one I took off. But we were able to use the cradle that it came on.
Read moreSKU: 2833706
Replacement motor
I ordered this motor on Wednesday and received it on Thursday by truck, fantastic shipping and very good pricing.
Read moreSKU: 25590
2 hp motors
This order came in without any issues. The price on this order was very competitive.
Read moreSKU: 26636
Baldor electric motors
Great motors...Always top quality. Will continue to purchase from MRO Supply.
Read more
| Brand | Timken |
| Model | SAS1 3/8 |
| Brand | KSM |
| Model | R16 ZZ |
| Brand | Baldor |
| Model | CJL1307A |
| Brand | Tingley |
| Model | MB920B-11 |
| Brand | Boston Gear |
| Model | SSHQC732W-20KC-B7-HS4-P30 |
| Brand | MCR Safety |
| Model | 3452L |
| Brand | Baldor |
| Model | FDL3733TM |
| Brand | SKF Bearing |
| Model | PCM 081012 E |
SKU: 2840530
Baldor erm3108
This motor is a little bit, maybe a half inch longer than the one I took off. But we were able to use the cradle that it came on.
Read moreSKU: 2833706
Replacement motor
I ordered this motor on Wednesday and received it on Thursday by truck, fantastic shipping and very good pricing.
Read moreSKU: 25590
2 hp motors
This order came in without any issues. The price on this order was very competitive.
Read moreSKU: 26636
Baldor electric motors
Great motors...Always top quality. Will continue to purchase from MRO Supply.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/