Image for Illustration purposes only. Actual product may vary
BALDOR VEM3554-5 1.5HP 1760RPM 3PH 60HZ 56C 3533M TEFC F1 575
MODEL VEM3554-5
Contact supplier for technical support on: 323 724 6771
$891.15 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable:No
Ambient Temperature
40 °C
Base Indicator
No Mounting
Conduit Box Material
Steel
Design Code
B
Duty Rating
CONT
Enclosure
TEFC
Frame
56C
Frame Material
Steel
HP
1.5
Hz
60
Insulation Class
F
Inverter Code
Inverter Ready
Motor Standards
NEMA
Motor Weight
50
Mounting Arrangement
F1
Number of Poles
4
Overall Length
13.22 in
Phase
3
Power Factor
74
Pulley Face Code
C-FACE
RPM
1700 - 1800
Service Factor
1.15
Shaft Diameter
0.625IN
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
1800
Voltage
575
See all of our 1.5 HP 56c Motors
| Enclosure | TEFC |
| Frame | 56C |
| Frame Material | Steel |
| Frequency | 60 Hz |
| Output @ Frequency | 1.500 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 575.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA CSA EEV |
| Ambient Temperature | 40 C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 1.700 A @ 575.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 88.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | No Feedback |
| High Voltage Full Load Amps | 1.7 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Ready |
| KVA Code | M |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 3 @ 18 AWG |
| Motor Type | 3534M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 14.10 IN |
| Power Factor | 76 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.15 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1760 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
SKU: 24596
Great service
Flawless from start to finish. Got my motor at the best price and delivered on time. I will definitely use this company again.
Read moreSKU: 25590
2 hp motors
This order came in without any issues. The price on this order was very competitive.
Read moreSKU: 27348
Baldor ga16 pedestal
As specified. Prompt delivery of two pedestals. No problems. Excellent in every regard.
Read moreBrand
Baldor
Model
VEM3554T
Brand
Baldor
Model
VEM3554-5
Brand
Baldor
Model
VEM3554T-5
Brand
Baldor
Model
VEM3554T-57
Brand
Baldor
Model
VEM3554
| Brand | Ringfeder |
| Model | 4181-360 |
| Brand | Bell & Gossett |
| Model | 118440 |
| Brand | Linn Gear |
| Model | HT27SP |
| Brand | Timken |
| Model | RCJ1-1/4 |
| Brand | McGill Bearing |
| Model | CCYR 2 3/4 S |
SKU: 24596
Great service
Flawless from start to finish. Got my motor at the best price and delivered on time. I will definitely use this company again.
Read moreSKU: 25590
2 hp motors
This order came in without any issues. The price on this order was very competitive.
Read moreSKU: 27348
Baldor ga16 pedestal
As specified. Prompt delivery of two pedestals. No problems. Excellent in every regard.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/