MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
BALDOR EM2238 10HP, 1775RPM, 3PH, 60HZ, 256U, 0936M, TEFC, F1, 208-230/460
MODEL EM2238
Contact supplier for technical support on: 323 724 6771
$4,952.97 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient Temperature
40 °C
Base Indicator
Rigid
Conduit Box Material
Cast Iron
Design Code
A
Duty Rating
CONT
Enclosure
TEFC
Frame
256U
Frame Material
Iron
HP
10
Hz
60
Insulation Class
F
Inverter Code
Inverter Ready
Motor Standards
NEMA
Motor Weight
252
Mounting Arrangement
F1
Number of Poles
4
Overall Length
23.11 in
Phase
3
Power Factor
78
Pulley Face Code
STANDARD
RPM
1700 - 1800
Service Factor
1.15
Shaft Diameter
1.375IN
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
1800
Voltage
208-230/460
| Enclosure | TEFC |
| Frame | 256U |
| Frame Material | Iron |
| Frequency | 60 Hz |
| Output @ Frequency | 10.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency |
460.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals |
CSA EEV UR CSA |
| Ambient Temperature | 40 C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage |
13.000 A @ 460.0 V 26.000 A @ 230.0 V 27.000 A @ 208.0 V |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 91.7 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | No Feedback |
| High Voltage Full Load Amps | 13.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Ready |
| KVA Code | K |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 12 AWG |
| Motor Type | 0936M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 22.91 IN |
| Power Factor | 78 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.375 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1775 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Brand | Dodge |
| Model | PA64261-2000 |
| Brand | Meltric |
| Model | 17-64111-A188-NC |
| Brand | Martin Sprocket |
| Model | 10S 1 7/8 |
| Brand | Flowtrend |
| Model | 105418 |
| Brand | Vernon Devices |
| Model | TBB-00021750 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-565151 |
| Brand | Baldor |
| Model | ECP3664T-4 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-537082 |
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/