MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Hubbell Wiring A460P9 PS IEC PLUG 3P4W 60A 3P 250V LOPRO
MODEL A460P9
This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: jruvalcaba@hubbell.c
$340.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Brand Minimum Order Quantity: 2
Typically Ships in: 1 day
Returnable: See conditions
Amperage
60A
Voltage
3 Phase 250V
Low Profile Pin and Sleeve, 60A 250V, 3P4W
Specifications
| Product Type | |
|---|---|
| IEC Product Type | Low Profile |
| Device | Plug |
| Amperage | 60A |
| Voltage | 3 Phase 250V |
| Poles and Wires | 3 Pole, 4 Wire |
| Terminal Accommodations | #6 To #4 AWG copper wire only |
| Cord clamp range | .75" To 1.25" |
| Color | |
| Housing | Zytel 101 Nylon |
| Shroud | Zytel 101 Nylon |
| Contact Carrier | High Impact Thermoset |
| Ground/Phase Pins | Brass CDA #360 |
| Terminal Screws | Stainless Steel (300 series) |
| Assembly Screws | Stainless Steel (300 series) |
| Certification | UL Listed, CSA Certified |
| Dielectric Withstand Voltage | 3000V AC |
| Max Working Voltage | 250V RMS |
| Current Interrupting | Certified for current interruption at full pated current. |
| Temperature Rise | Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75% |
| Endurance | Up to 5, 000 connect and disconnect cycles at full rated current. |
| Impact Resistance | Per CSA C22.2 N0.182.1 / UL1682 |
| Cord Grip Retention | Per CSA C22.2 N0.182.1 / UL1682 |
| Cord Accommodation | Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No.49 and the harmonized European Standards. |
| Terminal Identification | Terminals identified in accordance with North American and IEC conventions. |
| Product Identification | Identification and ratings are a permanent part of the device housing. |
| Moisture Resistance | Watertight per IEC 60309-1 |
| Ingress Protection | IP22 Suitability |
| Flammability | HB or better per UL94 or CSA C22.2 No, 0.17 |
| Operating Temperatures | Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact. |
| Certifications | UL Listed, CSA Certified. |
| Device Description | Where an IEC configuration is required but water resistance is not necessary, Low Profile Pin and Sleeve can make the connection. |
| UPC Number | 78358550780 |
| Weight in LBs | 1.65 |
SKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read more
#5016250
Brand
Hubbell Wiring
Model
A460R9KIT
#1023042
Brand
Hubbell Wiring
Model
HBL460R9W
#1014586
Brand
Hubbell Wiring
Model
A460P9
#1014588
Brand
Hubbell Wiring
Model
A460R9
| Brand | Irwin Tools |
| Model | 4048ZR |
| Brand | Baldor |
| Model | VESSWDM3546-5 |
| Brand | Remke |
| Model | 104EFW9 |
| Brand | Band-It |
| Model | AE4779 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-386500 |
| Brand | Thomson Linear |
| Model | 530LG |
| Brand | SKF Seals |
| Model | 99138 |
SKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/