MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Hubbell Wiring HBL7545C LKG PLUG 15A 125V L1-15P
MODEL HBL7545C
This vendor has a minimum order quantity of 22. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: jruvalcaba@hubbell.c
$19.71 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Brand Minimum Order Quantity: 22
Typically Ships in: 1 day
Returnable: See conditions
Amperage
15 A
Cable range
0.230 - 0.720 in
Color
Black, White
Connectivity
Pressure Terminal Screws
Cord dia
230 in-0.720 in
Cord range
0.230 in-0.720 in(5.8-18.3)
Cord type
All Listed Portables
Current / amperage rating
15 A
Current rating
15 A
Dielectric strength
Withstands 2,000V minimum
Dimensions
1.96 in x 1.52 in x 1.52 in
Environmental conditions
Indoor Dry Unless Protected By Additional Means
Height
1.52 in
HP
0.5
Length
1.96 in
Material
Composite
Material - mounting hardware
Cord Mounted
Max HP
0.5
Nema Rating
L1-15P
Number of poles
2-Pole
Number of wires
3-Wire
Operating temperature
Maximum continuous 75C and minimum -40C without Impact
Phase
Single phase
Voltage
125 V
Voltage rating description
125 V
Width (in)
1.52
Wire size
#14 AWG to #12 AWG
2P2W, 15A 125V, L1-15P, Black & White Nylon
Specifications
| Product Type | |
|---|---|
| Product Item | Plug |
| Wiring Scheme | 2-Pole, 2-Wire Non-Grounding |
| Amperage | 15A |
| Voltage | 125V AC |
| NEMA Configuration | L1-15P |
| Item Style | Standard |
| Device Color | Black/White |
| Horsepower | 0.5 |
| Cord Dia. | .230"-.720" (5.8-18.3) |
| Blade Holder Material | Natural White Nylon |
| Terminal Retainer Material | Clear polycarbonate |
| Housing Material | Black nylon |
| Cord Clamp Material | Natural (white) nylon |
| Blade Material | Brass |
| Terminal Clamp Material | Cold rolled steel-nickel-plated |
| Terminal Screw Material | #8-32 Brass (white finish on neutral screw when used) |
| Cord Clamp Screw Material | Steel-zinc-plated |
| Body Holding Screw Material | Steel-zinc-plated |
| Ratings | Molded In or Stamped On |
| Catalog No | Permanently ink marked on product |
| Dielectric Voltage Withstand | 2000V minimum |
| Current Interrupting | Certified for current interrupting at full rated current |
| Temperature Rise | Max 30C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of.75. |
| Cord Accommodation | Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No.49. |
| Terminal Accommodation | 15A #14 AWG |
| Terminal Identification | Terminals identified in accordance with UL 498 (X, Y, Z, White, Green) |
| Flammability | HB or better per UL 94 or CSA 22.2 No.0.6 |
| Operating Temperatures | Maximum Continuous 75 C Minimum -40 C (w/o impact) |
| Moisture Resistance | IP20 |
| Listings | UL |
| UPC Number | 783585178509 |
| Weight in LBs | 0.15 |
SKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read more
#1025430
Brand
Hubbell Wiring
Model
HBL7545C
#1024205
Brand
Hubbell Wiring
Model
HBL5469C
#5018982
Brand
Hubbell Wiring
Model
HBLRFKIT1
#1022891
Brand
Hubbell Wiring
Model
HBL4579C
#1023819
Brand
Hubbell Wiring
Model
HBL5266C
| Brand | Gates Rubber |
| Model | 225L050 |
| Brand | WEG |
| Model | SSW0708900-KVT-3C |
| Brand | Martin Sprocket |
| Model | CSD14063X35 |
| Brand | Remke |
| Model | 105P0010P1 |
| Brand | Jason Industrial |
| Model | 14T10/530DL |
| Brand | Gates Rubber |
| Model | 800XXH500 |
| Brand | SMC |
| Model | MIS25-50D-M9PWMDPC |
| Brand | Bando |
| Model | 20DT10-1250UG |
SKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/