Image for Illustration purposes only. Actual product may vary
Hubbell Wiring HBL7565CY LKG CONN 3P3W 10A 250V/15A125V YL
MODEL HBL7565CY
$50.79 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Typically Ships in: 1 day
Returnable: See conditions
Still Deciding?
Add this item to your saved items and easily come back later.
Color
Yellow
Amperage
10 A
Cord dia
230 in-0.720 in
Material
Nylon
Voltage
250/125 V
Environmental conditions
Indoor Dry Unless Protected By Additional Means
Wire size
#18 AWG to #10 AWG
Current rating
10 A
Dimensions
1.53 in x 1.53 in x 2.78 in
Current / amperage rating
10 A
Temperature rating
-40 C w/o impact, -25 with impact.
Width (in)
1.53
Dielectric strength
Withstands 2,000V minimum
Voltage rating description
250/125 V
Nema Rating
Non-NEMA
Connectivity
Pressure Terminal Screws
Operating temperature
Maximum continuous 75C and minimum -40C without Impact
Number of wires
3-Wire Non-Grounding
Length
1.53 in
Insulation
Insulated Body
Cord range
0.230 in-0.720 in(5.8-18.3)
Height
2.78 in
Number of poles
3-Pole
Material - mounting hardware
Cord Mounted
2P3W, 10A 250V/15A 125V, Non-NEMA, Black Phenolic
Specifications
Product Type | |
---|---|
Product Item | Connector Body |
Wiring Scheme | 3-Pole, 3-Wire Non-Grounding |
Multi-Rating | 10A 250V AC, 15A 125V |
Item Style | Insulgrip |
Device Color | Yellow |
Cord Dia. | .230"-.720" (5.8-18.3) |
Terminal Retainer Material | Clear polycarbonate |
Housing Material | Black nylon |
Cord Clamp Material | Natural (white) nylon |
Terminal Clamp Material | Cold rolled steel-nickel-plated |
Terminal Screw Material | #8-32 Brass (white finish on neutral screw when used) |
Ground Screw Material | # 8-32 Brass (green finish) |
Cord Clamp Screw Material | Steel, zinc plated Multi-drive |
Body Holding Screw Material | Steel, zinc plated Multi-drive |
Body Contact Carrier Material | Natural White Nylon |
Contact Spring Material | Brass |
Spring Binding Plate Material | Brass |
Ground Contact Material | .031" (.8) Brass |
Ratings | Molded In or Stamped On |
Catalog No | Permanently ink marked on product |
Dielectric Voltage Withstand | 2, 000V minimum |
Current Interrupting | Certified for current interrupting at full rated current |
Temperature Rise | Max 30C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of.75. |
Cord Accommodation | Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No.49. |
Terminal Accommodation | 15A #14 AWG |
Terminal Identification | Terminals identified in accordance with UL 498 (X, Y, Z, White, Green) |
Flammability | HB or better per UL 94 or CSA 22.2 No.0.6 |
Operating Temperatures | Maximum Continuous 75 C Minimum -40 C (w/o impact) |
Moisture Resistance | IP20 |
UPC Number | 783585178653 |
Weight in LBs | 0.2 |
SKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/