View cart
Add products to your shopping cart

Image for Illustration purposes only. Actual product may vary

BS1050-2 Bevel Gear

$176.65 Each


  • Typically ships in: 1 day
  • Weight: 3.5 lb
  • Free shipping on orders over $20

Select Quantity

Additional Description

Bevel Gears are used as right angle drives where high efficiency is required. They are carried in stock as 1:1 to 6:1 ratios. Bevel Gears are cut with the long and short addendum system and 20 degree pressure angle to compensate for tooth undercut in gears and pinions having low numbers of teeth. Most all of Martin Bevel Gears are cut with the Coniflex tooth form to allow for a slight misalignment at assembly and during operation. Gears should be mounted at the correct distance from the core of apex center with thrust bearings being used in back of hubs to absorb the backward thrust created in this type of gearing.
Material Steel Max Bore Size 1.126 in.
Diametral Pitch 10 Hub Outside Diameter 2.000 in.
Pressure Angle 20.000 deg. Hub Projection 1.000 in.
Number of Teeth 50 Ratio 2
Pitch Diameter 5.000 in. Mating Gear B1025-2
Outside Diameter 5.057 in. Mounting Distance 2.625 in.
Min Bore Size 0.750 in.
Storage Dimension Length 5.057 in. Storage Dimension Height 1.594 in.
Storage Dimension Width 5.057 in. Weight 3.58 lbs.


Material Steel
Outside Dia 5.057"
Number Of Teeth 50

Return policy

Item must be unused.

Item must be in it's original package.

Restocking, shipping and handling fees may apply to any return with this manufacturer.

For more information please consult


Product's availability

State of California Proposition 65 Product Warning