We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Power Team 9720 counterbalance valve is a hydraulic component designed for load-holding and motion control in high-pressure systems. Rated for 10,000 psi, this valve is compatible with Power Team pumps and cylinders. It serves as a direct replacement part for maintenance and repair of Power Team hydraulic equipment.
MODEL 9720
Contact supplier for technical support on: 800 477 8326
$2,744.06 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Body Material
Steel
Flow Rate
120 cu-ft/min
Height
3-1/4 in
Length
3-1/2 in
Media
Oil
Port Size
3/8 in NPTF
Pressure Rating
10000 psi
Type
Automatic
Width (in)
1-1/4
Double-acting cylinders. Provides positive holding and controlled, "chatter-free" lowering of a load.
Application: Double-acting cylinders. Provides positive holding and controlled, “chatter-free” lowering of a load. Operation: Load is raised at flow rate of pump, and held when pump is shut off. When the pump is shifted to “retract, ” the counter balance valve will continue to hold the load until system pressure exceeds pressure caused by load. The load can then be lowered smoothly to the flow rate of the pump. The counter balance valve is designed to operate with pumps having a high pressure flow rate of up to 120 cu. in. min. and cylinder ratios of 3 to 1. caution: The 9720 patented counter balance valve has a pilot pressure as high as 3, 000 psi. Because this pressure is applied to the rod end of the cylinder while it is already under load, the system should not be sized for loads greater than 80% of cylinder rated capacity. caution: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application.
Specifications
| Order No. | 9720 |
|---|---|
| Cylinder Application * | S. A. & D. A. |
| Operation | Automatic |
| Valve Type | Counter Balance Valve |
| Volt | — |
| Advance / Return | Special |
| Advance / Hold Return | — |
| posi-check Feature | — |
| posi-check Feature | 10. 0 |
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read more
| Brand | Bestorq |
| Model | D780H075 |
| Brand | Palmgren |
| Model | 9629416 |
| Brand | Bestorq |
| Model | 290J8 |
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.