MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Dixon 2940405C Rigid Tube x Push-on Hose Barb
MODEL 2940405C
This product has a minimum order quantity of (100 minimum) This is the minimum order quantity available when purchasing this product.
Contact supplier for technical support on: 8779634966
$4.78 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity(100 minimum)
Typically Ships in: 1 day
Returnable: See conditions
California Prop 65 warningHose I.D.
1/4 in
Length
1.88 in
Material
Brass
Pressure rating (psi)
350
Temperature range
-40F to 150F (-40C to 65.6C)
Tube O.D.
5/16 in
Installation
- Assembly Instructions:
- 1. Trim hose end with smooth square cut.
- 2. Lubricate either push-on fitting, hose or both.
- 3. Insert push-on fitting into hose until first barb is in hose.
- 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.
Instructions
- Disassembly instructions:
- 1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
- 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.
Note
No hose clamps or ferrules are needed
Safety Notes
- Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
- Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
Specifications
- Tube Length: 1.00"
- Number of Barbs: 2
- Barb Length: .77"
SKU: 105947
Crimps!
The dies work, MRO ... the retailer ... nice ... quick ... good price and delivered in days
Read moreSKU: 115099
Reasonable and reasonably fast shipping
My order was processed very quickly even with the changes I made on my original order with friendly people at MRO
Read moreSKU: 107691
Solid valve!
I use these valves as the trigger for some flame effects. They snap back quickly and don't wear out or pass center and leak like cheaper versions. Best bang for your buck!
Read more
#2932828
Brand
Dixon
Model
2941212SS
#2932821
Brand
Dixon
Model
2940606SS
#2932812
Brand
Dixon
Model
2940403C
#2932819
Brand
Dixon
Model
2940606C
#2932823
Brand
Dixon
Model
2940808CBC
| Brand | Kipp |
| Model | K2128.15022A2X40 |
| Brand | WILTON |
| Model | 90816 |
| Brand | Hubbell Wiring |
| Model | HBL69W75 |
| Brand | Belden |
| Model | UJ-SS29x14 |
| Brand | Martin Sprocket |
| Model | ML100 12MM |
| Brand | Band-It |
| Model | JS3339 |
| Brand | PIP |
| Model | 4035FR/6XL |
SKU: 105947
Crimps!
The dies work, MRO ... the retailer ... nice ... quick ... good price and delivered in days
Read moreSKU: 115099
Reasonable and reasonably fast shipping
My order was processed very quickly even with the changes I made on my original order with friendly people at MRO
Read moreSKU: 107691
Solid valve!
I use these valves as the trigger for some flame effects. They snap back quickly and don't wear out or pass center and leak like cheaper versions. Best bang for your buck!
Read more