Image for Illustration purposes only. Actual product may vary
- Brand: Dixon
- Model: 48P3LJ15
- Condition: NEW
- SKU: 104990
DIXON 48P3LJ15 3" HOLEDALL UNIRANGE LAP JOINTView additional description
- Typically ships in: 1 day
- Weight: 20.0 lb
- Contact supplier for technical support on: 877-963-4966
Unit of measure: each
Returnable: See conditions
- Carbon steel stem, ferrule and flange
- 150# ASA flange drilling
- The Holedall coupling provides long-lasting efficiency and safety.
- The coupling system requires no bolts and results in a clean coupling with no protrusions.
How it works
- The hydraulic swaging of the coupling to the hose is accomplished by pushing the ferrule through a die which reduces the ferrule OD, thus providing a 360° uninterrupted compression band around the hose.
- A hydraulic ram is the only piece of machinery necessary to accomplish the coupling. Rams are available in five different sizes- 15,25, 50,100 and 350 ton - these rams will accommodate dies and pushers of various sizes so that hoses up to 10" in diameter may be coupled.
- Couplings can be swaged or crimped.
- Dixon Holedall stems and ferrules are specifically designed to be used together as a coupling system.
- Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon Holedall products.
- Do not use a wrench or vice on ferrule
- Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure.
- Holedall fittings are not to be used with cable reinforced high-pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations. Consult Dixon for recommendations on usage.
- Externally swaged Holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon's assembly procedures, using correct die and ferrule for that particular hose end OD. Dixon's Die and Ferrule Recommendation Guide is to be used to select correct dies and ferrules. Consult the factory is you do not have an updated Die and Ferrule Recommendation Guide.
- Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting. The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure.
- Media being transported through the hose should be compatible with the stem material. Compatibility of ferrule material with the environment in which it will be used is recommended. Consult the Compatibility Chart or the Dixon factory for material compatibility.
- For applications other than the ones list, please consult the factory.
|Hose OD From||3-49/64"|
|Hose OD To||3-56/64"|
|Optional Pkg/Box Qty||1|
Perfect fit, excellent price.Read more
I use these valves as the trigger for some flame effects. They snap back quickly and don't wear out or pass center and leak like cheaper versions. Best bang for your buck!Read more
Exactly as advertised
exactly as advertised. shipping was next day and free.Read more