Categories

Subtotal

View cart
Add products to your shopping cart
#2932911

Image for Illustration purposes only

Actual product may vary

  • BRAND:
  • SKU: 2932911
  • CONDITION: NEW
  • MODEL: 2DL3-B

DIXON 2DL3-B 1/4" IND COUPLER 3/8" X 3/4" REUSE 850494

$11.65 Each

NEW

  • Free shipping on orders over $20
  • Typically ships in: 1 day
  • Weight: 0.4 lb

Select Quantity

Additional Description

Specifications
  • Rated pressure for connected Brass Coupler & Brass Plug: 300 PSI (20 bar) Maximum Working and 16,000 PSI (1,100 bar) Burst
  • Rated pressure for connected Brass Coupler & Steel Plug: 500 PSI (35 bar) Maximum Working and 16,000 PSI (1,100 bar) Burst
Construction
  • Machined components are manufactured using solid bar stock.
  • Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
  • Nitrile (Buna-N) seals are standard
  • Steel componentry is plated using ROHS Compliant Trivalent Chrome.
  • Steel tubular valve
Compatibility & Interchange Data
  • Foster 3, 4, 5 and 6 Series
  • Parker 30- Series Automatic Interchange
  • Hansen 3000, 4000, 5000 and 6000
How it works
  • To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free.
  • Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand.
  • After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted.
  • After the line is fully exhausted, you are able to safely separate the nipple from the coupler.
Safety notes
  • It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
  • Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
  • Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
  • WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.
Part Number 2DL3-B
Material Brass
Hose ID 3/8"
Hose OD 3/4"
Maximum OD 0.98"
Body Size 1/4"
Hex 11/16"
Length 2.85"
Pressure Rating See Product Details
Temperature Range -40°F to +250°F (-40°C to +121°C)
Optional Pkg/Box Qty 10
Weight Lb 0.3900

Specifications:

Hose ID 3/8"
Length 2.85"
Material Brass
Hex 11/16"
Hose Id 3/8"

Return policy

Item must be unused.

Item must be in it's original package.

Product's availability

State of California Proposition 65 Product Warning