Categories

Subtotal

View cart
Add products to your shopping cart
#2934375

Image for Illustration purposes only. Actual product may vary

  • BRAND:
  • SKU: 2934375
  • CONDITION: NEW
  • MODEL: D2B2-B

DIXON D2B2-B 1/4" Push-Loc Brass 420913

$1.67 Each

NEW

  • Typically ships in: 1 day
  • Weight: 0.1 lb
  • Free shipping on orders over $20

Select Quantity

Additional Description

Specifications
  • Rated pressure when connected with Brass D-Series Automatic Couplers: 500 PSI (35 bar) Maximum Working and 16,000 PSI (1,100 bar) Burst
  • Rated pressure when connected with Brass F-Series Manual Couplers: 300 PSI (20 bar) Maximum Working and 8,500 PSI (586 bar) Burst
Construction
  • Machined components are manufactured using solid bar stock.
Compatibility & Interchange Data
  • Foster 3, 4, 5 and 6 Series
  • Parker 30- Series Automatic Interchange & Parker 20-Series Manual Interchange
  • Hansen 3000, 4000, 5000 and 6000 & Hansen 1000, 400 and 500
How it works
  • To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free.
  • Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand.
  • After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted.
  • After the line is fully exhausted, you are able to safely separate the nipple from the coupler.
Safety notes
  • It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
  • Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
  • Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
  • WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.
Part Number D2B2-B
Material Brass
Hose ID 1/4"
Maximum OD 0.69"
Body Size 1/4"
Length 2.09"
Pressure Rating See Product Details
Temperature Range -40°F to +250°F (-40°C to +121°C)
Optional Pkg/Box Qty 10
Weight Lb 0.0500

Documents

Specifications:

Hose ID 1/4"
Length 2.09"
Material Brass
Hose Id 1/4"

Return policy

Item must be unused.

Item must be in it's original package.

Product's availability

State of California Proposition 65 Product Warning