Image for Illustration purposes only. Actual product may vary
SKF Bearing LAGM 1000E Maintenance Products
MODEL LAGM 1000E
$1,036.17 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable:No
Ambient Temperature Range
-20-55 °C
Battery
1x AA (LR6) Alkaline (incl.)
Battery Life
50 hrs, with backlight;2000 hrs, without backlight;10000 hrs, display off
Connecting Thread
M 10 x 1
Degree of Protection (IP)
IP 67
Display
Backlit LCD display (4 digits / 9 mm)
Flow Rate (max)
1000
Material
Anodised aluminium housing with rubber protective sleeve
Maximum Pressure
700 bar
Measurement Accuracy (+/-)
±3% from 0 - 300 bar;±5% from 300 - 700 bar
Measurement Modes
cm³, g, US fl. oz or oz
NLGI Consistency Class
NLGI 0 - NLGI 3
Operation
Electronic grease meter with display
Pack Height
95 mm
Pack Length
325 mm
Pack Width
95 mm
Software Features
Total and Subtotal counting;Autoswitch off programable;Display brightness selectable;Measuring units selectable;Automatic activation;Calibration mode
Suitable Operating Devices
For mounting on grease guns and grease triggers from grease pumps
Grease meter, measuring grease discharge
The SKF Grease Meter LAGM 1000E measures accurately the amount of grease passing through. Generally it is difficult to supply an accurate grease quantity per stroke when manually lubricating bearings. The right amount of grease, however, is critical for the bearings' service life, as over- or under-lubrication can result in bearing damage and machine breakdown. Even when weighing the grease amount per stroke, real conditions such as backpressure, wear inside the grease gun and others can result in varying lubrication amounts. Only with a grease meter the actual relubrication quantity can be measured accurately.
- Suitable for most NLGI 0-3 greases
- Small, compact and lightweight design
- Corrosion-free aluminium housing with rubber sleeve protection
- Compatible with all SKF grease guns
- Backlit LCD display with large and easy-to-read digits
Brand
Alemite
Model
3530
| Brand | AMI Bearings |
| Model | UCHPL206-20CEB |
| Brand | Aurora Motors |
| Model | 46WP1HS7.5HE |
| Brand | NAE |
| Model | VC250/280-BLANK |
| Brand | SIEGMA |
| Model | 5GN100RC |
| Brand | Gates Rubber |
| Model | CP-36-8MGT |
| Brand | Tingley |
| Model | O22008-L |
| Brand | WEG |
| Model | TBX-X360/400-3 |
| Brand | WEG |
| Model | NDE-IM71 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF