Image for Illustration purposes only. Actual product may vary
L1408T-50 3HP, 1425RPM, 1PH, 50HZ, 184T, 3646LC, OPEN, F1
MODEL L1408T-50
Contact supplier for technical support on: 479-646-4711
$1,090.09 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: See conditions
Still Deciding?
Add this item to your saved items and easily come back later.
Hz
50
Frame
184T
HP
3
Voltage
110/220
Phase
1
RPM
1425
Enclosure
OPEN
| Output | 3 |
|---|---|
| RPM | 1425 |
| Pallet Quantity | 12 |
| Specification Number | 36E02X359 |
| Frame | 184T |
| Weight | 91. 000 LB |
| Multiplier | L1 |
| Enclosure | OPEN |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 110/220 |
| Poles | 04 |
| Class | STOCK |
| Type | 3646LC |
| Status | Active |
| Commodity Code | 8501. 40. 6040 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | AH |
|---|---|
| Status | PRD/A |
| Change # | 747919 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 3646LC |
| Elec. Spec | 36WGX359 |
| CD Diagram | CD0055 |
| Enclosure | OPEN |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 36E002 |
| Layout | 36LYE002 |
| Frame | 184T |
| Mounting | F1 |
| Poles | 04 |
| Created Date | |
| Base | RG |
| Rotation | R |
| Insulation | B |
| Eff. Date | 5/22/2012 |
| Leads | 4#14 A PH, 2#16 B PH |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for L1408T-50
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 36E02X359 | BALDOR/FT SMITH/REC WHSE #5 | 8/10/1999 | 46LC 4P OPEN HOR 184T |
| Nameplate No. | NP1372L |
|---|---|
| CAT. NO. | L1408T-50 |
| SPEC. | 36E02X359 |
| HP | 3 |
| VOLTS | 110/220 |
| AMP | 32/16 |
| RPM | 1425 |
| FRAME | 184T |
| HZ | 50 |
| PH | 1 |
| SER. F. | 1. 15 |
| CODE | G |
| DES | L |
| CL | B |
| NEMA-NOM-EFF | 75. 5 |
| PF | 85 |
| RATING | 40C AMB-CONT |
| CC | |
| USABLE AT 208V | |
| DE | 6206 |
| ODE | 6205 |
| ENCL | OPEN |
| SN | |
| IP23 |
General Characteristics
| Full Load Torque | 10. 8 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 5. 7 Amps |
| Break-Down Torque | 24 LB-FT |
| Line-line Res. @ 25°C. | 0. 828 Ohms A Ph / 0. 999 Ohms B Ph |
| Pull-Up Torque | 24 LB-FT |
| Temp. Rise @ Rated Load | 80°C |
| Locked-Rotor Torque | 33 LB-FT |
| Temp. Rise @ S. F. Load | 90°C |
| Starting Current | 95 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 54 | 66 | 76 | 83 | 87 | 90 | 85 |
| Efficiency | 70. 8 | 78. 5 | 82. 5 | 75. 6 | 70. 2 | 62. 6 | 72. 4 |
| Speed (RPM) | 1487 | 1466 | 1459 | 1425 | 1396 | 1348 | 1408 |
| Line Amperes | 6. 8 | 9. 8 | 12. 1 | 15. 8 | 20 | 25 | 18. 32 |
Parts for current product
| Product Number | Description | Quantity | |
|---|---|---|---|
| SA034424 | SA 36E02-2761 | 1 EA | |
| RA030452 | RA 36E02-2761 | 1 EA | |
| TP5059 | GENERIC THERMAL KIT | 1 EA | |
| 36CB3004 | 36 CB CASTING W/1. 09 DIA LEAD HOLE @ 6: 0 | 1 EA | |
| 51XB1016A08 | 10-16X 1/2HXWSSLD SERTYB | 2 EA | |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA | |
| HW3001B01 | 003SS CUP WASHER, FOR #8 SCREW | 1 EA | |
| 36EP3200A01SP | FR ENDPLATE, MACH | 1 EA | |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA | |
| SP1008A01 | BAFFLE, MODEL 36 & 37 | 1 EA | |
| 13XT0832A07 | 8-32X7/16 TYP 23 PAN HD SLT DX | 2 EA | |
| 10XN2520A12 | O1/4-20X 3/4 HEX HEAD CAP | 2 EA | |
| HW5100A05 | WVY WSHR F/205 & 304 BRGS | 1 EA | |
| 36EP3201A01 | PU ENDPLATE, MACH 182-4T | 1 EA | |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA | |
| XY2520A12 | 1/4-20 HEX NUT, DIRECTIONAL SERRATIONS | 4 EA | |
| 36CB4516 | 36 LIPPED CB LID | 1 EA | |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 4 EA | |
| HW2501E16 | 3KEY, 1/4 SQ X 1. 750 | 1 EA | |
| HA7000A02 | KEY RETAINER RING, 1 1/8 DIA, 1 3/8 DIA | 1 EA | |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA | |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB | |
| MG1000G27 | PAINT- S9282E CHARCOAL GREY | 0. 022 GA | |
| HA3101A25 | THRUBOLT 1/4-20 X 11. 000 OHIO ROD | 4 EA | |
| 36CB5010A01 | CAPACITOR BOX KIT, 36CB3800, OC3020F12 | 1 EA | |
| SP5064A06 | MODEL 36 TYPE LC STAT SWITCH LEAD ASSEMB | 1 EA | |
| LB1119 | WARNING LABEL | 1 EA | |
| LB1125C01 | STD (STOCK) CARTON LABEL BALDOR WITH FLA | 1 EA | |
| LB1087 | LABEL, MANUAL RESET (ROLL LABEL) | 1 EA | |
| LC0016 | CONNECTION LABEL | 1 EA | |
| NP1257L | ALUM UL CSA CC THERMAL REV MTG | 1 EA | |
| 36PA1000 | PACK GROUP W/LB5001 | 1 EA | |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
Accesories
| Product Number | Description | Multiplier |
|---|---|---|
| 36-3403 | C FACE KIT | A8 |
| 36EP1405A09SP | D-FLANGE KIT | A8 |
SKU: 2840530
Baldor erm3108
This motor is a little bit, maybe a half inch longer than the one I took off. But we were able to use the cradle that it came on.
Read moreSKU: 2833706
Replacement motor
I ordered this motor on Wednesday and received it on Thursday by truck, fantastic shipping and very good pricing.
Read moreSKU: 25344
Outstanding customer service & competetive pricing
The website is great and easy to navigate but when we run into $1000+ orders a simple phone call is available.
Read more
#25280
Brand
Baldor
Model
L1408T-50
#25555
Brand
Baldor
Model
L1408T
#25227
Brand
Baldor
Model
L1408TM
#2526426
Brand
Leeson
Model
131554.00
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/