Image for Illustration purposes only. Actual product may vary
L3510-50 1HP, 1425RPM, 1PH, 50HZ, 56, 3532L, TEFC, F1
MODEL L3510-50
Contact supplier for technical support on: 479-646-4711
$758.13 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: See conditions
Still Deciding?
Add this item to your saved items and easily come back later.
Hz
50
Frame
56
HP
1
Voltage
110/220
Phase
1
RPM
1425
Enclosure
TEFC
| Output | 1 |
|---|---|
| RPM | 1425 |
| Pallet Quantity | 35 |
| Specification Number | 35C11Y990 |
| Frame | 56 |
| Weight | 47. 000 LB |
| Multiplier | K |
| Enclosure | TEFC |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 110/220 |
| Poles | 04 |
| Class | STOCK |
| Type | 3532L |
| Status | Active |
| Commodity Code | 8501. 40. 6040 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | AG |
|---|---|
| Status | PRD/A |
| Change # | 787505 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 3532L |
| Elec. Spec | 35WGY990 |
| CD Diagram | CD0001 |
| Enclosure | TEFC |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 35C011 |
| Layout | 35LYC011 |
| Frame | 56 |
| Mounting | F1 |
| Poles | 04 |
| Created Date | |
| Base | RG |
| Rotation | R |
| Insulation | B |
| Eff. Date | 2/28/2013 |
| Leads | 6#18 |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for L3510-50
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 35C11Y990 | BALDOR/FT SMITH/REC WHSE #5 | 8/10/1999 | 32L 4P TEFC HOR 56 |
| Nameplate No. | NP1372L |
|---|---|
| CAT. NO. | L3510-50 |
| SPEC. | 35C11Y990 |
| HP | 1 |
| VOLTS | 110/220 |
| AMP | 12. 4/6. 2 |
| RPM | 1425 |
| FRAME | 56 |
| HZ | 50 |
| PH | 1 |
| SER. F. | 1. 15 |
| CODE | J |
| DES | L |
| CL | B |
| NEMA-NOM-EFF | 68 |
| PF | 82 |
| RATING | 40C AMB-CONT |
| CC | |
| USABLE AT 208V | |
| DE | 6205 |
| ODE | 6203 |
| ENCL | TEFC |
| SN | |
| IP54 |
General Characteristics
| Full Load Torque | 3. 69 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 3. 19 Amps |
| Break-Down Torque | 10. 8 LB-FT |
| Line-line Res. @ 25°C. | 2. 9 Ohms A Ph / 1. 77 Ohms B Ph |
| Pull-Up Torque | 9. 53 LB-FT |
| Temp. Rise @ Rated Load | 62°C |
| Locked-Rotor Torque | 13 LB-FT |
| Temp. Rise @ S. F. Load | 76°C |
| Starting Current | 36. 9 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 41 | 62 | 74 | 81 | 86 | 88 | 84 |
| Efficiency | 61. 2 | 71. 3 | 72. 8 | 70. 2 | 63. 2 | 53 | 66 |
| Speed (RPM) | 1488 | 1471 | 1452 | 1427 | 1384 | 1322 | 1401 |
| Line Amperes | 3. 36 | 3. 92 | 4. 79 | 5. 97 | 7. 94 | 10. 5 | 7. 15 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA255021 | SA 35J383N635G1 | 1 EA |
| RA241825 | RA 35J383N635G1 | 1 EA |
| EC1850A06SP | ELEC CAP 115V 2. 0 X 4. 3 X | 1 EA |
| TP5059 | GENERIC THERMAL KIT | 1 EA |
| NS2512A01 | INSULATOR, CONDUIT BOX X | 1 EA |
| 35CB3007 | 35 CB CASTING W/. 88 DIA. LEAD HOLE | 1 EA |
| 36GS1000SP | GASKET-CONDUIT BOX, . 06 THICK #SV-330 LE | 1 EA |
| 51XB1016A07 | 10-16 X 7/16 HXWSSLD SERTYB | 2 EA |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 2 EA |
| 35EP3100M02 | FREP TEFC 203 BRG W/O GRSR (RAISED FH MT | 1 EA |
| NS2501A01 | INSULATOR, CAPACITOR | 1 EA |
| 35CB4802A02SP | CAPACITOR COVER, STAMPED X W/AUTOPHORET | 1 EA |
| 35GS3001A02 | GASKET, CA. COVER, 5. 38 LONG. 06 CS301 | 1 EA |
| 51XB1016A05 | 10-16X5/16HX WA SL SR TYB (F/S) | 2 EA |
| HW5100A03SP | WAVY WASHER (W1543-017) | 1 EA |
| 35EP3101A02SP | STD PU ENDPLATE-ENCL-205 BRG LESS GREASE | 1 EA |
| XY1032A02 | 10-32 HEX NUT DIRECTIONAL SERRATION | 4 EA |
| 51XB1214A16 | 12-14X1. 00 HXWSSLD SERTYB | 1 EA |
| 35FH4005A32SP | IEC FH NO GRSR W/3 HOLES - W/AUTOPHERETI | 1 EA |
| 51XW1032A06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD S | 3 EA |
| 35CB4521GX | CONDUIT BOX LID KIT | 1 EA |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 4 EA |
| HW2501D13SP | KEY, 3/16 SQ X 1. 375 | 1 EA |
| HA7000A04 | KEY RETAINER 0. 625 DIA SHAFTS | 1 EA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| WD1000A15 | 3-520132-2 AMP FLAG (4M/RL NON-CANC/NON- | 2 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB |
| 35FN3002A05SP | EXFN, PLASTIC, 6. 376 OD, . 638 ID | 1 EA |
| MG1000G27 | PAINT- S9282E CHARCOAL GREY | 0. 017 GA |
| HA3100A18 | THRUBOLT 10-32 X 9. 250 | 4 EA |
| SP5055A67 | MODEL 35 TYPE L STATIONARY SWITCH | 1 EA |
| LB1118 | LABEL, WARNING (ROLL LABEL) | 1 EA |
| LB1125C01 | STD (STOCK) CARTON LABEL BALDOR WITH FLA | 1 EA |
| LC0269 | 1PH, DV, REV, THERMAL, 7 LD, L. AMP THRU HTR H | 1 EA |
| NP1257L | ALUM UL CSA CC THERMAL REV MTG | 1 EA |
| 35PA1066 | PACKING GROUP COMBINED PRINT | 1 EA |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
Accesories
| Product Number | Description | Multiplier |
|---|---|---|
| 35-8762 | C FACE KIT | A8 |
| 35EP1506A01SP | D-FLANGE KIT | A8 |
SKU: 25992
Positive
I am a Purchasing Agent for a company with 30 plants. MRO is one of the best vendors out there. Use you all the time.
Read more
#25915
Brand
Baldor
Model
L3510A
#25972
Brand
Baldor
Model
L3510-50
#25977
Brand
Baldor
Model
L3510TM
#26461
Brand
Baldor
Model
L3507
#26237
Brand
Baldor
Model
L3510T
#2525734
Brand
Leeson
Model
113911.00
#2525421
Brand
Leeson
Model
110066.00
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/