Add products to your shopping cart
#23747
Image for Illustration purposes only. Actual product may vary
- BRAND: Baldor
- SKU: 23747
- CONDITION: NEW
- MODEL: AEM2238-4
AEM2238-4 10HP, 1765RPM, 3PH, 60HZ, 256U, 0932M, TEFC, F1
$2,423.98 Each
NEW
- Typically ships in: 1 day
- Weight: 245.0 lb
- Free shipping on orders over $20
- Contiguous U.S. States
- Payment methods:
- Returnable: See conditions
- Unit of Measure: each
Select Quantity
Additional Description
| Output | 10 | RPM | 1760 | Pallet Quantity | 6 |
|---|---|---|---|---|---|
| Specification Number | 09T36X154M | Frame | 256U | Weight | 245.000 LB |
| Multiplier | L1 | Enclosure | TEFC | Item Type | MOTOR |
| Manufacturing Plant | OZARK | Voltage | 460 | Poles | 04 |
| Class | STOCK | Type | 0932M | Status | Active |
| Commodity Code | 8501.52.4000 | Origin | US | ||
| Explosion Proof Class/Group | NONE |
| Revision | U | Status | PRD/A | Change # | 736338 | Proprietary | No |
|---|---|---|---|---|---|---|---|
| Type | AC | Prod. Type | 0932M | Elec. Spec | 09WGX154 | CD Diagram | CD0006 |
| Enclosure | TEFC | Manufacturing Plant | OZARK | Mech. Spec | 09T36 | Layout | 09LYT036 |
| Frame | 256U | Mounting | F1 | Poles | 04 | Created Date | |
| Base | RG | Rotation | R | Insulation | F | Eff. Date | 3/12/2012 |
| Leads | 3#12 | Literature | Elec. Diagram | Replaced By |
Specification History for AEM2238-4
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 09T36X154M | BALDOR/OZARK | 4/18/2001 | 32M 4P TEFC HOR 256U | |
| 09T36X154M | BALDOR/COLUMBUS | 4/18/2001 | 32M 4P TEFC HOR 256U |
| Nameplate No. | NP1404E | ||||||
|---|---|---|---|---|---|---|---|
| CAT.NO. | AEM2238-4 | ||||||
| SPEC. | 09T36X154M | ||||||
| VOLTS | 460 | ||||||
| AMP | 12 | ||||||
| RPM | 1760 | HP | 10 | ||||
| FRAME | 256U | HZ | 60 | PH | 3 | ||
| SER.F. | 1.00 | CODE | G | DES | B | CL | F |
| NEMA-NOM-EFF | 90.2 | PF | 87 | ||||
| G.MIN.EFF | 88.5 | CC | |||||
| RATING | 65C AMB-CONT | ||||||
| LUBRICATION | POLYREX EM | ||||||
| DE | 6309 | ODE | 6208 | ||||
| ENCL | TEFC | SER. # | |||||
| MEETS GM-7EHQ |
General Characteristics
| Full Load Torque | 29.8 LB-FT | Start Configuration | DOL |
|---|---|---|---|
| No-Load Current | 4.4 Amps | Break-Down Torque | 92 LB-FT |
| Line-line Res. @ 25°C. | 1.05 Ohms A Ph / 0 Ohms B Ph | Pull-Up Torque | 41 LB-FT |
| Temp. Rise @ Rated Load | 50°C | Locked-Rotor Torque | 51 LB-FT |
| Temp. Rise @ S.F. Load | Starting Current | 77 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S.F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 54 | 75 | 83 | 87 | 88 | 89 | 0 |
| Efficiency | 82.8 | 88.6 | 90 | 90.2 | 89.8 | 88.9 | 0 |
| Speed (RPM) | 1791 | 1783 | 1774 | 1765 | 1756 | 1745 | 0 |
| Line Amperes | 5.3 | 7.1 | 9.4 | 12 | 14.8 | 17.8 | 0 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA013207 | SA 09T36X154M | 1 EA |
| RA009406 | RA 09T36X154M | 1 EA |
| HW1002A63 | WASHER, 5/8 HI-COLLAR SPRLCKWASHER | 1 EA |
| 09CB1002A12P | KOBX W/1.25 NPT LEAD HOLE & 2.38 MTG HOL | 1 EA |
| 09GS1010 | GASKET, DWG, LEADWIRE SEPERATOR | 1 EA |
| 10XN2520K12 | 1/4-20 X.75 GRD 5 | 4 EA |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT .493 OD, .255 I | 4 EA |
| WD1000B16 | KPA-4C BURNDY TERMINAL | 1 EA |
| 10XN2520K06 | 1/4-20 X 3/8' HX HD SCREWGRADE 5, ZINC P | 1 EA |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT .493 OD, .255 I | 1 EA |
| 09EP1100A14P | ENDPLATE, MACH W/EPOXY PRIMER | 1 EA |
| HA3400A33 | STUD- 3/8-16 X 4.82 HEX WELKER | 4 EA |
| HW1001A38 | LOCKWASHER 3/8, ZINC PLT .688 OD, .382 I | 4 EA |
| HA1005A12SP | SLINGER, OD 2.50, ID 1.433, 208 BRG | 1 EA |
| HW5100A08 | W3118-035 WVY WSHR (WB) | 1 EA |
| 10XN2520K28 | 1/4-20 X 1.75' HX HD SCRWGRADE 5, ZINC P | 2 EA |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT .493 OD, .255 I | 2 EA |
| 09EP1101A11P | MACH'D EPOXY PRIMED EP | 1 EA |
| 10XN3816K24 | 3/8-16 X 1.50 HEX HD CAP SCREW, GRADE 5 | 4 EA |
| HW1001A38 | LOCKWASHER 3/8, ZINC PLT .688 OD, .382 I | 4 EA |
| HW4600B44SP | V-RING SLINGER 1.500 X 2.290 X 0.280 | 1 EA |
| 10XN2520K36 | 1/4-20 X 2.25' HX HD SCRWGRADE 5, ZINC P | 4 EA |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT .493 OD, .255 I | 4 EA |
| 09FH4000P | FAN COVER, STAMPED W/EPOXY PRIMER | 1 EA |
| XY3816A12 | 3/8-16 FINISHED NUT | 4 EA |
| HW1001A38 | LOCKWASHER 3/8, ZINC PLT .688 OD, .382 I | 4 EA |
| 12CB1500A01P | CONDUIT BOX LID, MACH W/EPOXY PRIMER | 1 EA |
| 12GS1002 | GASKET, CONDUIT BOX LID, NEOP | 1 EA |
| 10XN3118K24 | 5/16-18 X 1.50' HEX HD, GRADE 5 | 2 EA |
| HW1001A31 | LOCKWASHER 5/16, ZINC PLT.591 OD, .319 I | 2 EA |
| HW2501F24 | KEY, 5/16 SQ X 2.750 | 1 EA |
| MJ5001A01 | 46-665 RED SEALER | 0.031 QT |
| MJ5002A01 | SILICON RUBBER SEALANT, 732CL 10.3 OZ TU | 0.05 EA |
| MJ5001A14 | DYNAPRO SEAL, CP MOTORS VC#2508050 (603 | 0.001 EA |
| MJ5004A04 | ADHESIVE LOCTITE 609 | 0.005 EA |
| LB1115 | LABEL,LIFTING DEVICE | 1 EA |
| LB5040 | INSTRUCTION TAG, AC & DC | 1 EA |
| WD1000B07 | TERMINAL, BURNDY YAV10-T3 | 3 EA |
| HW4500A20 | 1/8NPT SL PIPE PLUG | 2 EA |
| HA4001A01SP | DRAIN PLUG, PLASTIC (MICRO PLAS) | 1 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0.08 LB |
| HW4500A20 | 1/8NPT SL PIPE PLUG | 3 EA |
| MG1025G02 | PAINT, 782-02 WILKOFAST LIGHT GREY EPOXY | 0.05 GA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| 09FN3001D01SP | EXTERNAL FAN, PLASTIC | 1 EA |
| HW2500A25 | WOODRUFF KEY USA #1008 #BLOW CARBON STEE | 1 EA |
| 51XB1214A20 | 12-14X1.25 HXWSSLD SERTYB | 1 EA |
| LB1119 | WARNING LABEL | 1 EA |
| LB1125C02 | SUPER-E (STOCK CTN LABEL SUPER-E WITH FL | 4 EA |
| LC0006 | CONNECTION LABEL | 1 EA |
| NP1404E | SS UL CSA CC 'AUTOMOTIVE' | 1 EA |
| 09PA1000 | PACKAGING GROUP COMBINED PRINT | 1 EA |
| LB1506 | LABEL 'AMERICAN MADE' 1.50 X 1.00 | 1 EA |
Accesories
| Product Number | Description | Multiplier | |
|---|---|---|---|
| 09-1309 | C FACE KIT (kit may require RB3001A01) | A8 |
Specifications:
| hz | 60 |
| voltage | 460 |
| phase | 3 |
| frame | 256U |
| rpm | 1765 |
| hp | 10 |
| enclosure | TEFC |
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/
