Add products to your shopping cart
#23493
Image for Illustration purposes only. Actual product may vary
- Brand: Baldor
- Model: VHECP3771T
- Condition: NEW
- SKU: 23493
VHECP3771T 10HP, 3500RPM, 3PH, 60HZ, 215HP, 0742M, TEFC, F
- Typically ships in: 1 day
- Weight: 203.0 lb
- Contact supplier for technical support on: 323-724-6771
$2,303.89 Each
Select Quantity
Additional Description
| Output | 10 | RPM | 3500 | Pallet Quantity | 0 |
|---|---|---|---|---|---|
| Specification Number | 07K215Y012G1 | Frame | 215HP | Weight | 203.000 LB |
| Multiplier | SD | Enclosure | TEFC | Item Type | MOTOR |
| Manufacturing Plant | FT SMITH | Voltage | 230/460 | Poles | 02 |
| Class | STOCK | Type | 0742M | Status | Active |
| Commodity Code | 8501.52.4000 | Origin | US | ||
| Explosion Proof Class/Group | NONE |
| Revision | C | Status | PRD/A | Change # | 783705 | Proprietary | No |
|---|---|---|---|---|---|---|---|
| Type | AC | Prod. Type | 0742M | Elec. Spec | 07WGY012 | CD Diagram | CD0005 |
| Enclosure | TEFC | Manufacturing Plant | FT SMITH | Mech. Spec | 07K215 | Layout | 07LYK215 |
| Frame | 215HP | Mounting | F1 | Poles | 02 | Created Date | 9/11/2012 |
| Base | N | Rotation | R | Insulation | F | Eff. Date | 2/1/2013 |
| Leads | 9#14 | Literature | Elec. Diagram | Replaced By |
Specification History for VHECP3771T
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 07K215Y012G1 | BALDOR/FT SMITH/REC WHSE #5 | 9/11/2012 | 42M 2P TEFC VER 215HP CP SP32-6 DRPCVR | |
| 07K215W723 | BALDOR/FT SMITH/REC WHSE #5 | 1/12/2005 | 44M 2P TEFC VER 215HP CP SP32-6 DRPCVR |
| Nameplate No. | NP1260E | ||||||
|---|---|---|---|---|---|---|---|
| CAT.NO. | VHECP3771T | ||||||
| SPEC. | 07K215Y012G1 | ||||||
| HP | 10 | ||||||
| VOLTS | 230/460 | ||||||
| AMP | 22/11 | ||||||
| RPM | 3500 | ||||||
| FRAME | 215HP | HZ | 60 | PH | 3 | ||
| SER.F. | 1.15 | CODE | H | DES | B | CL | F |
| NEMA-NOM-EFF | 92.4 | PF | 90 | ||||
| RATING | 40C AMB-CONT | ||||||
| CC | 010A | USABLE AT 208V | 24.5 | ||||
| DE | 6309 | ODE | 6206 | ||||
| ENCL | TEFC | SN | |||||
General Characteristics
| Full Load Torque | 14.9 LB-FT | Start Configuration | DOL |
|---|---|---|---|
| No-Load Current | 3.61 Amps | Break-Down Torque | 70.8 LB-FT |
| Line-line Res. @ 25°C. | 0.776 Ohms A Ph / 0 Ohms B Ph | Pull-Up Torque | 24.2 LB-FT |
| Temp. Rise @ Rated Load | 40°C | Locked-Rotor Torque | 32.6 LB-FT |
| Temp. Rise @ S.F. Load | 51°C | Starting Current | 88.5 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S.F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 58 | 79 | 88 | 90 | 92 | 91 | 91 |
| Efficiency | 90.1 | 93 | 93.2 | 92.5 | 91.4 | 90 | 91.8 |
| Speed (RPM) | 3578.4 | 3554.5 | 3528.7 | 3503.4 | 3473.7 | 3440.8 | 3486 |
| Line Amperes | 4.43 | 6.32 | 8.64 | 11.1 | 13.9 | 17.1 | 12.8 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA126232 | SA 07K215X776 | 1 EA |
| RA116548 | RA 07K215X776 | 1 EA |
| 37FN3002C01 | EXFN, PLASTIC, 6.00 OD, 1.155 ID | 1 EA |
| S/P107-000-001 | SUPER E PROC'S-FS & WS PLTS-POLYREX EM G | 1 EA |
| HA6283A01 | SP'L EYE BOLT BRACKET FOR 306 & 307 MTRS | 2 EA |
| 10XN3816A12 | 3/8-16 X 3/4 HEX HD CAP SCREW | 2 EA |
| HW1001A38 | LOCKWASHER 3/8, ZINC PLT .688 OD, .382 I | 2 EA |
| 10XN2520A06 | 1/4 20X3/8 HX HD CAP | 2 EA |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT .493 OD, .255 I | 2 EA |
| WD1000B16 | KPA-4C BURNDY TERMINAL | 2 EA |
| 09CB1001A26G | CONDUIT BOX, MACH W/GRAY EPOXY, W/1.50 N | 1 EA |
| RM1017 | LEAD SEPERATOR GASKET MODEL 307 1/8' THK | 1 EA |
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD | 4 EA |
| 11XW1032G06 | 10-32 X .38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| HW1001A10 | WASHER, #10 SPLT LK, ZN X | 1 EA |
| WD1000B17 | KPA-8C BURNDY TERMINAL | 1 EA |
| 37EP1100B16G | FR EP 37L TEFC W/GRSR-RELIEF, NO DRAIN ( | 1 EA |
| HW4500A32 | FIT./EXT 1698-B (ALEMITE)GREASE FITTING | 1 EA |
| HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA |
| HW5100A06 | W2420-025 WVY WSHR (WB) | 1 EA |
| HW4600B48 | SEAL 2.438 X 3.350 X .375 SINGLE LIP | 1 EA |
| 37EP1504A12G | PULLEY 213-5LP 254LP ENCL 309 BRG W/ SEA | 1 EA |
| HW4600B53 | SEAL 1.688 X 2.275 X 0.312 SINGLE LIP DB | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA |
| 10XN2520A52 | 1/4-20X 3 .25 HEX HD CAP ZN | 2 EA |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT .493 OD, .255 I | 2 EA |
| 51XB1214A20 | 12-14X1.25 HXWSSLD SERTYB | 1 EA |
| 07FH1001A06G | 307 FH FOR MTG TO FR E.P. W/GREASER & DR | 1 EA |
| 10XN2520A24 | 1/4-20X 1 1/2 HEX HD X | 3 EA |
| WD4100A02 | DP-1000 HEYCO PLUG OR 62MP1000 MICRO PL | 1 EA |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT .493 OD, .255 I | 3 EA |
| 40FH2500A04G | P'L DRIP COVER MODEL 40- OPEN MACH, GRA | 1 EA |
| HA2086A03 | .375 X 1.0 HVY-FT SPACER SPIRAL # 62434 | 4 EA |
| 10XN3816A32 | 3/8-16 X 2 HEX HD CAP SCREW | 4 EA |
| HW1001A38 | LOCKWASHER 3/8, ZINC PLT .688 OD, .382 I | 4 EA |
| HW4600B36SP | V-RING SLINGER 1.188 X 1.690 X 0.240 | 1 EA |
| HW4600B44SP | V-RING SLINGER 1.500 X 2.290 X 0.280 | 1 EA |
| 09CB1504A01G | LIPPED CONDUIT BOX LID, MACH GRAY EPOXY | 1 EA |
| 09GS1001A01SP | GASKET, BOX LID, 1/8 THICK BLACK NEOPREN | 1 EA |
| 10XN2520A12 | O1/4-20X 3/4 HEX HEAD CAP | 2 EA |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT .493 OD, .255 I | 2 EA |
| MJ5001A01 | 46-665 RED SEALER | 0.001 QT |
| MJ5001A14 | DYNAPRO SEAL, CP MOTORS VC#2508050 (603 | 0.001 EA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| LB1115 | LABEL,LIFTING DEVICE | 1 EA |
| LB1002 | LABEL,MARINE DUTY (ON ROLLS) | 1 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0.05 LB |
| HA3104A13 | THRUBOLT 5/16-18 X 11.750 OHIO ROD | 4 EA |
| MG1025N19 | PAINT, 778.50 WILKO, RELIANCE ELEC GREEN | 0.036 GA |
| LC0005E01 | CONN.DIA./WARNING LABEL (LC0005/LB1119) | 1 EA |
| LB1125C02 | SUPER-E (STOCK CTN LABEL SUPER-E WITH FL | 1 EA |
| NP1260E | SS CP SUPER-E UL CSA CC | 1 EA |
| 07PA1097 | PKG GRP, 07 CAST IRON 2X4 RISERS PK1181 | 1 EA |
| 07PA1095 | PKG GRP, VER 07 CAST IRON | 1 EA |
| LB1506 | LABEL 'AMERICAN MADE' 1.50 X 1.00 | 1 EA |
Specifications:
| hz | 60 |
| voltage | 230/460 |
| phase | 3 |
| frame | 215HP |
| rpm | 3500 |
| hp | 10 |
| enclosure | TEFC |
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/
