116347.00

Regal Beloit Leeson&Reg; 116347.00

UPC: 691720307441 | UNSPSC: 26101602 | GTIN:

Electric Motors > AC Motors

LEESON® Washguard® AC Motor, 2-Pole Continuous Duty, Special Features: Capacitor Start Motors, Washdown Duty Motors, 1 hp, 115/208 to 230 VAC, 12/6.8 to 6 A, 60 Hz, 1 ph, 3450 rpm, 1 Speed, Totally Enclosed Nonvented (TENV), 56HC Frame, 0.63 in Dia x 1.88 in L Shaft, Selective CCW, Service Factor: 1.15, Ball Bearing, 24 ft-lb, C-Face Footed Rigid Base Mount, 40 deg C, Insulation Class: Class F, Rolled Steel, 10:1 Variable Torque Speed, 13.7 in L x 6.5 in W x 6.79 in H

Features:

• All exterior components are 300 series stainless steel
• All sealing components are FKM for superior chemical resistance
• Full fact nameplate is laser etched on the motor frame
• End shields are O-ring sealed to the frame
• Double lip shaft seals on both ends of TEFC motors
• Removable hydrophobic breathers in opposite shaft end bell and conduit box equalize pressure without allowing moisture to enter
• Exterior fastener use minimized reducing the number of entry points for moisture
• Double sealed bearings are pre-lubricated with moisture resistant high temperature grease for long life
• Interior coatings applied to rotor and stator protect against corrosion and ease to clean construction
• New conduit box mounting system provides optimum sealing
• Ease to clean construction
• Windings are immersed and cured in polyester insulating varnish for extra moisture resistance
• Exclusive IRIS® inverter duty insulation system provides extra protection and long life and especially in inverter-driven applications
• Single phase motors use solid state Sinpac® switch, no mechanical switch contacts to corrode and fail

Specs:

• Type: 2-Pole Continuous Duty
• Material: Rolled Steel
• Dimensions: 13.7 in L x 6.5 in W x 6.79 in H
• Voltage Rating: 115/208 to 230 VAC
• Amperage Rating: 12/6.8 to 6 A
• Mounting Type: C-Face Footed Rigid Base
• Frequency Rating: 60 Hz
• Speed: 3450 rpm
• Enclosure Type: Totally Enclosed Nonvented (TENV)
• Temperature Rating: 40 deg C
• Bearing Type: Ball
• Frame: 56HC
• Rotation: Selective CCW
• Number of Speeds: 1
• Horsepower: 1 hp
• Phase: 1 ph
• Torque Rating: 24 ft-lb
• Shaft Size: 0.63 in Dia x 1.88 in L
• Insulation Class: Class F
• Special Features: Capacitor Start Motors, Washdown Duty Motors
• Service Factor: 1.15
• Variable Torque Speed Range: 10:1

Certifications/Standards:

BISSC 769 | CSA Certified | UL E57948

Warranty:

1 Year