Call (888)-671-2883
 on most items
Text message to Live Chat! (201) 898 - 2676

M1125004.00 18:1 100Rpm 36Lbin 1/17Hp 30 Dc Gearmotors 90V Tenv 985 626H

BRAND: Leeson | MODEL: M1125004.00 | CONDITION: NEW | SKU: 227356
M1125004.00 18:1 100Rpm 36Lbin 1/17Hp 30 Dc Gearmotors 90V Tenv 985 626H

Image for Illustration purposes only,
Actual product may vary
Typically In Stock: confirm availability
Returnable: see conditions
Shipping from?: see locations Ships in 1 day
Weight: 10.00 lbs UOM: EA

Additional Description



BODINE/DAYTON Direct Interchange

Model PZ gearmotors
have the same mounting dimensions as Bodine model D and Z, Baldor/Boehm, Bison 100 gearmotors, and a number of Dayton gearmotors.

Mechanical Specifications:
Precision machined in-line steel gears, with a first stage steel helical gear followed by spur-type gears. Lubrication is permanent semi-fluid grease, reducing possibility of leakage. Output shafts have needle bearings for high load capacities. Shafts are hardened steel. Conduit Box not included with motor.

Application Notes:
These gearmotors are designed for mounting at any angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail. The motor’s stall torque could exceed recommended full load torques. If this service is anticipated, a current limiting device should be used. This issue is even more critical for low voltage motors, typically no controller is used since motor connected directly to battery, so some type of current limit or fusing should be considered.Overhung load capacities shown are at the center of output shaft.
RPM 100 Volts 90 Volts  
HPKW 1/17 F.L. Amps 0.8 F.L. Amps  
Frame 30 S. F Amps   S. F Amps  
Max Amb 40 Hertz   Phase  
Insul Class F3 Duty CONT TYPE DN
Model # 985.626 Serv. Factor 1.0 PF  
Eff 100%   Eff 75%   Enclosure TENV
Protection NOT Therm.Prot.   Bearing OPE 6000
Design   Code   Bearing PE 6000
UL Yes CSA Yes CE Yes
Torque lb-In 36 Nameplate M100414702 Lubrication  
Series PZ Overhung Ld. 171 Shaft Type PARALLEL