Call (888)-671-2883
 on most items
Text message to Live Chat! (201) 898 - 2676

M1125073.00 19:1 94RPM 77LB IN .125HP 30 DC GEARMOTORS SUB-FHP 90V DC TENV

BRAND: Leeson | MODEL: M1125073.00 | CONDITION: NEW | SKU: 227377
M1125073.00 19:1 94RPM 77LB IN .125HP 30 DC GEARMOTORS SUB-FHP 90V DC TENV

Image for Illustration purposes only,
Actual product may vary
Returnable: see conditions
Shipping from?: see locations Typically ships in 1 day
Weight: 12.00 lbs UOM: EA

Additional Description



This gearmotor is designed for mounting at any angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail. Motor’s stall torque could exceed recommended full load torques. A current limiting device such as an SCR control should be used to prevent damage. This issue is even more critical for low voltage motors, typically no controller is used since motor is connected directly to a battery, so some type of current limit or fusing should be considered. Overhung load capacities shown are at center of output shaft.

  • Made in the USA
  • Steel frame
  • Precision machined in-line steel gears
  • First stage steel helical gear followed by spur-type gears
  • Lubrication is permanent semi-fluid grease, reducing possibility of leakage
  • Output shafts have needle bearings for high load capacities
  • Shafts are hardened steel
  • Conduit box not included, optional conduit box available
  • Bison/Dayton direct interchange
  • Footnotes: S, US
RPM 94 Volts 90 Volts  
HPKW 1/8 F.L. Amps 1.3 F.L. Amps  
Frame 30 S. F Amps   S. F Amps  
Max Amb 40 Hertz   Phase  
Insul Class F3 Duty CONT TYPE DN
Model # 985.613 Serv. Factor 1.0 PF  
Eff 100%   Eff 75%   Enclosure TENV
Protection NOT Therm.Prot.   Bearing OPE  
Design   Code   Bearing PE  
UL Yes CSA Yes CE Yes
    Nameplate M100414702 Lubrication  
Series P300 Overrlung Ld. 236 Shaft Type PARALLEL
Motor Wt. 12 LB Mounting SPECIAL Rotation RECONN
Carton Label Subfrac Individual Assembly M1041133    
Winding MD302166 Shaft Dia. 5/8 Ext. Diag2 M112507300FI