#1385895
Image for Illustration purposes only. Actual product may vary
- Brand: Krylon
- Model: K00532910-16
- Condition: NEW
- SKU: 1385895
Krylon K00532910-16 Industrial ALK Enamel Safety Yellow 1gal. (4)
View additional description- Typically ships in: 1 day
- Weight: 0.0 lb
- Contact supplier for technical support on: 800-251-2486
$48.77 Each
Select Quantity (minimum 4)
Item must be unused.
Item must be in it's original package
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/
Item must be unused.
Item must be in it's original package
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/
Additional Description
Industrial Alkyd Enamel - 53 Series
INDUSTRIAL ALKYD ENAMEL 53 Series is a general maintenance, multi-purpose, alkyd gloss enamel designed for industrial maintenance applications. This all purpose, durable utility enamel is easy to brush, roll or spray and is intended for use in normal industrial environments.
- Exterior/interior all purpose maintenance enamel
- High gloss makes it resistant to dirt and easier to clean
- Dries fast and allows equipment to be placed back in service quickly
- Can be custom tinted
- PDS
- Product Use Instructions
Mix thoroughly by mechanical shaker or stirring. For best results, brush prime all welds, sharp edges and crevices prior to application of full prime coat. RECOMMENDED SYSTEM Use full body for best results. Thinning is not normally required. However, if conditions require thinning, reduce up to 1 pt. per gallon with mineral spirits. For best results and maximum corrosion protection, use two topcoats @ 4.5 mils wet (2 dry mil/coat).
Specifications
Mix thoroughly by mechanical shaker or stirring. For best results, brush prime all welds, sharp edges and crevices prior to application of full prime coat. RECOMMENDED SYSTEM Use full body for best results. Thinning is not normally required. However, if conditions require thinning, reduce up to 1 pt. per gallon with mineral spirits. For best results and maximum corrosion protection, use two topcoats @ 4.5 mils wet (2 dry mil/coat).