Call (888)-671-2883
FREE SHIPPING
 on most items
Text message to Live Chat! (210) 878 - 2676

KRY K22049223 Primer White Pigmented Shellac Aerosol Krylon Commercial Coatings 16oz. (12)

BRAND: Krylon | MODEL: K22049223 | CONDITION: NEW | SKU: 1386385
KRY K22049223 Primer White Pigmented Shellac Aerosol Krylon Commercial Coatings 16oz. (12)

Image for Illustration purposes only,
Actual product may vary
$6.03
Typically In Stock: confirm availability
Returnable: see conditions
Shipping from?: see locations Ships in 1 day
Weight: 0.00 lbs UOM: EA
100% SAFE SHOPPING
PAYMENT METHOD
 
 

Additional Description

Description

White Pigmented Shellac Aerosol

WHITE PIGMENTED SHELLAC PRIMER is formulated for fire restoration work. It blocks and permanently hides stubborn stains caused by fires and floods other related smoke odors. Plus, its excellent coverage, tannin seal, and fast drying properties will shorten your time at the jobsite. In fire restoration projects, White Pigmented Shellac Primer will save you time and set the stage for an outstanding finish.

  • Permanently seals odors caused by soot, smoke and pets
  • Ensures a uniform sealed surface
  • Primes and seals in one coat
  • Fast drying
  • Product Use Instructions

AEROSOL - Use in a well-ventilated area at temperature range of 0°F to 90°F. Shake can for 2 minutes after ball within begins to rattle. Spray 8" to 12" from surface in a sweeping motion. Move can with short dusting strokes, releasing button at the end of each stroke. Avoid runs and drips by applying several thin coats at one spraying. After each use, clear valve by holding can upside down and spraying until only clear gas comes out. If spray button becomes clogged, wear eye protection, wipe off the button opening with lacquer thinner – DO NOT stick pin in spray button opening. Dispose of in accordance with local, state or federal regulations.

Specifications

AEROSOL - Use in a well-ventilated area at temperature range of 0°F to 90°F. Shake can for 2 minutes after ball within begins to rattle. Spray 8" to 12" from surface in a sweeping motion. Move can with short dusting strokes, releasing button at the end of each stroke. Avoid runs and drips by applying several thin coats at one spraying. After each use, clear valve by holding can upside down and spraying until only clear gas comes out. If spray button becomes clogged, wear eye protection, wipe off the button opening with lacquer thinner – DO NOT stick pin in spray button opening. Dispose of in accordance with local, state or federal regulations.