# FC-SC-108 | Dodge - MROSupply.com ***Dodge 124225 FC-SC-108 Bore Diameter: 1-1/2 Inch Housing: Piloted Flange Locking: Set Screw*** ## Product details: - Catalog number: FC-SC-108 - SKU: 123462 - Price: ***$163.83*** Each - Shipping: ***FREE SHIPPING*** ON ORDERS OVER $100 - Typically Ships in: 1 day - Brand: [Dodge](https://www.mrosupply.com/brands/dodge/) - Category: - [Piloted Flange](htts://www.mrosupply.com/bearings/mounted-bearings/mounted-ball-bearings/flanged-mounted-bearings/piloted-flange/) - [Flanged Mounted Bearings](htts://www.mrosupply.com/bearings/mounted-bearings/mounted-ball-bearings/flanged-mounted-bearings/) - [Mounted Ball Bearings](htts://www.mrosupply.com/bearings/mounted-bearings/mounted-ball-bearings/) - [Mounted Bearings](htts://www.mrosupply.com/bearings/mounted-bearings/) - [Bearings](htts://www.mrosupply.com/bearings/) - Unit of measure: each - Weight: 4.600 lb - Technicall support: contact supplier for technical support on +1-864-284-5700 ## Product images: - https://static.mrosupply.com/images/noimage.webp ## Product attributes; - Application: General Purpose - Ball bearing series: 208 series - Bearing type: Ball, ball - Bolt circle: 4.3800 in, 111.252 mm - Bolt Diameter: 0.4375 in - Bolt to bolt max: 4.3800 in, 111.252 mm - Bolt to bolt min: 4.3800 in, 111.252 mm - Bore: 1 1/2 in - Bore Diameter: 1-1/2" shaft diameter - Bore length: 1.9400 in, 49.276 mm - Duty: Standard Duty - Duty Rating: Standard Duty - Expansion: No - Expansion capability: Non-expansion (fixed) - Finish: Powder coated - Greasable: Yes - High temp: No - Housing construction: Solid - Housing material: Cast iron - Housing Material: Cast iron - Housing option: Cast iron - Housing type: Piloted flange - I.D.: 1 1/2 in - Insert material: Steel - Insert option: Bearing steel - Insert type: Ball Bearing - Locking: Set screw - Lubrication type: Grease - Max RPM: 5000 rpm - Max Speed: 3500 RPM - Pilot depth: 0.4400 in, 11.176 mm - Pilot diameter: 3.6250 in, 92.075 mm - Relubrication: Yes - Rolling element: Standard duty ball - Seal option: DualGuard seals with flingers - Seal Type: DualGuard single lip seal - Sensor ready: Adapter required - Series: 208 Series ball bearing insert - Shaft: Nitrile rubber - Shaft attachment: Setscrew - Shaft diameter: 1.5000 in - Standoff housing: No - Static load capacity: 4475 lbf, 19905.792 N - Suitable for high temperature: No - Suitable for washdown: No - Type: 4-bolt piloted flange ## Product documents / software: - [Accessories](https://documents.mrosupply.com/product_documents/12/123858/Setscrew_Ball_Bearings_Accessories_Related_Products.pdf) - [Brochure](https://documents.mrosupply.com/product_documents/12/34/123462/329231_3dHfUi1.pdf) - [Dimensions](https://documents.mrosupply.com/product_documents/06/068839/Setscrew_Ball_Bearings_Flange_Selection_Dimensions.pdf) - [Features](https://documents.mrosupply.com/product_documents/12/123858/Setscrew_Ball_Bearings_Features.pdf) - [Instruction Manual](https://documents.mrosupply.com/product_documents/12/34/123462/329234_vjErEn3.pdf) - [Nomenclature](https://documents.mrosupply.com/product_documents/12/123858/Setscrew_Ball_Bearings_How_to_Order_Nomenclature.pdf) - [Selection](https://documents.mrosupply.com/product_documents/12/123858/Setscrew_Ball_Bearings_Easy_Selection.pdf) - [2D DXF front](https://documents.mrosupply.com/product_documents/12/124225/baldor2d_124225_front_uPoU9Go.dxf) - [2D DXF right](https://documents.mrosupply.com/product_documents/12/124225/baldor2d_124225_right_e36ANtS.dxf) - [2D DXF top](https://documents.mrosupply.com/product_documents/12/124225/baldor2d_124225_top_dDe9jBr.dxf) - [3D DXF](https://documents.mrosupply.com/product_documents/12/124225/baldor_dxf3d_124225_N57QMXl.dxf) - [3D PDF Datasheet](https://documents.mrosupply.com/product_documents/12/124225/baldor_pdf_124225_y7oPzeG.pdf) ## Alternate products to `FC-SC-108 | Dodge - MROSupply.com`: - [SealMaster SFC-24 1.5" Mounted Ball Bearing, Cast Iron Piloted Flange, 52100 Bearing Steel, Black Oxide Coated, Setscrew Lock, Felt Labyrinth Seal](https://www.mrosupply.com/products/2257290/as-markdown/) - [SealMaster MFC-39 GOLD SET SCREW](https://www.mrosupply.com/products/2253894/as-markdown/) - [SealMaster SFC-24TC 1.5" Mounted Ball Bearing, Cast Iron Piloted Flange, 52100 Bearing Steel, Black Oxide Coated, Concentric Lock, Single Lip Contact Seal](https://www.mrosupply.com/products/2257294/as-markdown/) - [SealMaster MFC-28 1.75" Mounted Ball Bearing, Cast Iron Piloted Flange, 52100 Bearing Steel, Black Oxide Coated, Setscrew Lock, Felt Labyrinth Seal](https://www.mrosupply.com/products/2253883/as-markdown/) - [SealMaster MFC-32 2" Mounted Ball Bearing, Cast Iron Piloted Flange, 52100 Bearing Steel, Black Oxide Coated, Setscrew Lock, Felt Labyrinth Seal](https://www.mrosupply.com/products/422916/as-markdown/) - [SealMaster SFC-22C 1.375" Mounted Ball Bearing, Cast Iron Piloted Flange, 52100 Bearing Steel, Black Oxide Coated, Setscrew Lock, Single Lip Contact Seal](https://www.mrosupply.com/products/2259542/as-markdown/) - [SealMaster MFC-31 1.938" Mounted Ball Bearing, Cast Iron Piloted Flange, 52100 Bearing Steel, Black Oxide Coated, Setscrew Lock, Felt Labyrinth Seal](https://www.mrosupply.com/products/423078/as-markdown/) - [SealMaster SFC-23T 1.438" Mounted Ball Bearing, Cast Iron Piloted Flange, 52100 Bearing Steel, Black Oxide Coated, Concentric Lock, Felt Labyrinth Seal](https://www.mrosupply.com/products/2257286/as-markdown/) ## Suggested products: - [DODGE 057798 P2B-SCAH-012-HT 3/4 BORE](https://www.mrosupply.com/products/123526/as-markdown/) - [Dodge 123803 P2B-SC-012 Bore Diameter: 3/4 Inch Housing: Pillow Block Locking: Set Screw](https://www.mrosupply.com/products/123363/as-markdown/) - [DODGE 068372 P2B-SC-20M-NL BEARINGS](https://www.mrosupply.com/products/5002792/as-markdown/) - [DODGE 128721 P2B-DLB-012](https://www.mrosupply.com/products/125623/as-markdown/) - [DODGE 123904 P2B-SCAH-012 3/4 BORE](https://www.mrosupply.com/products/123535/as-markdown/) ## Product's reviews: - Perfect fit and finish - Good product, perfect fit and finish, good price and fast shipping. Thanks - E20 - This is exactly what I needed. Price was way below my local business that carries couplings. Thanks. - Oem parts - I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner. - Great price/great product - Shipping was fast and the price was best I could find. Product was new in a the sealed Dodge box. Perfect. ## FAQ: - How do I read a Dodge mounted ball bearing part number like P2B-SC-207?: Dodge ball bearing names run housing, bearing type, shaft size, then options. In P2B-SC-207, P2B is a 2-bolt pillow block, SC is a wide inner ring, normal duty insert with 65 degree setscrew locking, and 207 is the shaft size: the first digit is whole inches and the next two are sixteenths, so 207 is 2-7/16 in. An S after the size means the next smaller ring size (104S), L the next larger, and M a metric bore (25M). Trailing codes add options, for example E for expansion, HT for high temperature, CR for a corrosion resistant insert and NL for no lube. - What is the difference between Dodge SC, SCM, VSC, SXR, SXV, GT and DL ball bearings?: The letters give the shaft locking method and duty. SC (normal duty) and SCM (medium duty) are wide inner ring inserts locked by two setscrews at 65 degrees; VSC is also a 65 degree setscrew bearing, offered in 1/2 to 2-3/16 in bores. SXR is a wide inner ring with an eccentric locking collar, and SXV a narrow inner ring eccentric collar design. GT (Grip Tight) locks on a thin wall tapered adapter sleeve, and DL (D-Lok) uses a concentric clamp collar with a single cap screw over a slotted inner ring. DLM is the medium duty D-Lok and GTM the medium duty Grip Tight. - Will a Dodge Grip Tight bearing fit a commercial grade or slightly worn shaft?: Yes. Dodge recommends bearing quality shaft tolerances, but Grip Tight is built to accept commercial grade shafting, which is typically undersized. Its recommended shaft tolerance is the same as commercial shafting (+0.000/-0.002 in up to 1-1/2 in, -0.003 in to 2-1/2 in, -0.004 in above). The tapered adapter grips the shaft through 360 degrees, which avoids the setscrew marks and fretting corrosion that make a shaft hard to reuse, and the locknut and inner ring act as a built-in puller for removal. D-Lok, by comparison, calls for a tighter tolerance of +0.0000/-0.0005 in up to 1-1/2 in. - What do the AH, B, H, U, ED and EZ letters in a Dodge ball bearing name mean?: They are suffixes on the bearing type code. AH is the air handling version (for example SCAH, SCMAH). B is a low backing height pillow block and H a high backing height. U is a higher back pillow block made for interchangeability with competitor pillow blocks, so look for a U version (such as SCU or SXRU) when replacing another brand on an existing base. ED marks the Harsh Duty line, formerly called Extreme Duty (SCED, SCMED). EZ marks E-Z Kleen and Ultra Kleen units with polymer or stainless steel housings, with BEZ and UEZ as their low and higher back pillow blocks. - Can I replace just the insert in a Dodge mounted ball bearing?: Yes. Dodge sells replacement inserts under an INS prefix, matched to the bearing type and shaft size of the original unit, for example INS-SC-104S-CR or INS-DL-107. Housings are the same across the standard ball bearing line, so standard duty inserts (SC, SXR, DL and GT) share one housing and medium duty inserts (SCM, DLM and GTM) share another. On SC and SCM units an anti-rotation pin stops the outer race turning in the housing, and Dodge notes this makes inserts easier to replace because grease fittings and location pins do not have to come out. For Grip Tight, the housing can be bought without an adapter (for example P2B-GT-06) and the adapter and nut bought by shaft size (AN-GT-06-104), since the adapter sets the bore within a housing series. - What grease do Dodge bearings come with from the factory?: Standard Dodge mounted bearings ship shaft-ready with an NLGI #2 lithium-based grease. Ball bearing inserts are factory-filled with Mobil Unirex N2 (a lithium complex grease); roller bearings get a heavier grease, Mobil XHP 222. Bearings can also be ordered dry, or with a special grease, if your plant runs its own lubrication standard. - How do I keep water out of a bearing on a wet shaft (washers, washdown conveyors)?: Three factory-recommended angles: a more robust multi-lip seal option for the housing where one exists; Dodge's modern SAF-style mounted bearing, which installs faster than a traditional SAF assembly and seals better; and continuous lubrication with an automatic lubricator (IntelliLube), which keeps a positive grease purge at the seal so water is pushed out instead of drawn in. - Which Dodge bearings hold up on sand-and-gravel conveyors with regular washdown?: Dodge's Harsh Duty series (formerly the Defender series) was designed for aggregate duty. It's a seal upgrade over the standard product with identical mounting dimensions, so it drops into your existing footprint: Harsh Duty versions exist for Type E and TAF tapered-roller pillow blocks and for ball bearings (ED suffix). The tapered line carries a one-year performance guarantee against solid-particle-contamination failure when commissioned with a Dodge IntelliLube automatic lubricator. - How much grease is in a Dodge bearing out of the box?: Most standard Dodge bearings ship with a 33–35% factory grease fill. Washdown bearings ship 100% full; Harsh Duty ball bearings ship at 66%. All are shaft-ready out of the box — no pre-lube needed before installation. - How does Dodge warranty evaluation work if a product fails?: Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat. - How does a piloted flange differ from a non-piloted flange?: A piloted flange includes a machined boss that seats into a corresponding bore, while non-piloted flanges rely only on bolt friction for load transmission. This pilot design provides superior alignment accuracy, easier installation, and better vibration control, making it ideal for high-speed applications where precision positioning is critical. - What maintenance do piloted flange bearings require?: Piloted flange bearings come prelubricated and ready for immediate installation with grease fittings for ongoing maintenance. Periodic regreasing extends bearing life; bonded seal designs with slinger and lip seals protect against contamination in wet or dusty environments, making them suitable for agricultural and food-processing applications. - What applications are piloted flange bearings used in?: Piloted flange bearings are used in conveyors, fans, pumps, compressors, and agricultural equipment where precise shaft positioning is critical. The pilot register simplifies replacement and ensures consistent alignment when bearing units are changed during maintenance. - What is a piloted flange bearing?: A piloted flange bearing is a mounted bearing unit with an integrated pilot register that fits into a precise bore on the mounting surface, ensuring accurate centering and alignment during installation. The pilot design reduces misalignment to within 0.02-0.05mm and transmits radial loads directly into the mounting structure for enhanced stability. - What are the typical load ratings for piloted flange bearings?: Piloted flange bearings in the UCFC series range from 34,100 N to 84,000 N in dynamic load capacity, with static ratings from 21,300 N to 61,900 N depending on bore size. Bore sizes typically range from 45 mm to 85 mm, with prelubricated designs rated for speeds that require robust sealing and grease retention. - What is the main advantage of a flanged mounted bearing over a standard bearing?: Flanged mounted bearings have an integrated mounting flange that acts as a built-in retaining surface, eliminating the need for separate brackets, adapters, or machining. The flange provides precise axial positioning and simplifies installation by allowing you to bolt directly to your housing surface, reducing assembly time and cost. - Do flanged mounted bearings require periodic maintenance like standard bearings?: Many flanged mounted bearings come with permanent grease lubrication sealed for life, eliminating the need for re-greasing during operation. However, some designs may require periodic relubrication depending on operating conditions, so always verify the maintenance requirements with your bearing's technical documentation. - What critical dimensions do I need to know to select the right flanged mounted bearing?: You need to verify four key dimensions: bore diameter (the shaft size), outer diameter (housing bore fit), bearing width, and flange outer diameter and thickness. These specifications ensure proper load distribution and prevent slipping or misalignment during operation. - Can flanged mounted bearings handle both radial and axial loads?: Most flanged mounted bearings are designed to absorb high radial loads, while some units can handle moderate axial loads in both directions. Check the manufacturer datasheet for your specific bearing model to confirm dynamic and static load ratings before final selection. - What mounting surface requirements must I meet for proper flange installation?: The mounting surface must be flat and stable to prevent angular, axial, or parallel misalignment that can cause edge loads and premature bearing failure. Confirm that your housing face is clean and flat within tolerance, and that all bolt holes align correctly before installation. - How do I install a mounted bearing correctly?: Verify your shaft diameter is within the bearing bore tolerance (consult the NSK or SKF datasheet), then secure the bearing to the mounting surface using the specified bolt torque and engage the locking collar or set-screw on the shaft to prevent axial slip. Hand-rotate the shaft through several complete turns with a dial indicator, laser alignment tool, or feeler gauge to confirm smooth operation and proper shaft runout within spec. - How often should I grease a mounted bearing?: Use the formula (OD in mm) × (Width in mm) × 0.005 = grams for periodic relubrication of the bearing element only; initial housing cavity fill is separate and should be 30–50% of free volume. Over-greasing damages seals and generates excess heat—stick to the calculated quantity and recommended relubrication schedule. - What temperature should a mounted bearing run at?: Monitor housing surface temperature (the standard MRO measurement point): 40–65°C is normal, 70–75°C warrants investigation of misalignment or over-greasing, and 80°C requires immediate shutdown. The inner race runs 15–30°C hotter than the housing surface, so an 80°C housing reading means lubricant degradation is accelerating and the bearing requires emergency diagnosis. - When should I replace a mounted bearing?: Replace based on condition: vibration signature analysis or ultrasonic emission (detected with a hand-held meter) indicates wear hours or days before audible noise appears, and is the actionable MRO signal. Other replacement triggers include continuous operation above 80°C housing temperature, visible grease leakage, or reaching the manufacturer's service interval for your duty cycle. Scheduled relubrication and temperature monitoring extend service life significantly — replacement is a last resort, not preventive maintenance. - What are the main types of mounted bearings?: Mounted bearings come in four main forms: pillow blocks (flat-base, shaft parallel to mounting surface), flange mounts (perpendicular shaft, available in 2-bolt and 4-bolt variants with different radial ratings), hanger bearings (overhead support for long horizontal shafts), and take-up frames (adjustable center-distance units for belt or chain drive tensioning). Select based on your shaft orientation, load direction, and space constraints. - How do I choose the right type of bearing for my application?: Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design. - How should I maintain and lubricate bearings?: Lubrication Importance — Improper lubrication causes over 40% of bearing failures. Proper bearing lubrication prevents friction damage, dissipates heat, protects against corrosion, and acts as a barrier against contaminants (dust, moisture, debris). Lubrication Selection — Choose between grease and oil based on: - Grease: Suitable for low-to-medium speed, sealed bearings, and applications without continuous circulation. Easier to apply and retain. Common for motors, household appliances, and sealed units. - Oil Mist or Circulating Systems: Better for high-speed applications, high-temperature environments, and heavy-load machinery where heat dissipation is critical. Best Practices: 1. Map all lubrication points and create a maintenance schedule. 2. Use the correct lubricant type and viscosity grade specified by the bearing manufacturer. 3. Store lubricants in sealed, labeled containers away from moisture and contaminants. 4. Monitor bearing temperature and vibration; unusual heat or noise may indicate inadequate lubrication or bearing wear. 5. Replace bearings before reaching L10 life if contamination or lubrication failure is detected. - What is bearing life (L10) and how does it affect my equipment maintenance?: L10 Life Definition (ISO 281) — L10 is the basic rating life at which 90% of a large group of identical bearings are statistically expected to survive under constant load and speed. It is calculated in millions of revolutions using the formula: L10 = (C/P)^p, where C is the basic dynamic load rating, P is the equivalent dynamic bearing load, and p is the life exponent (3 for ball bearings). Converting L10 to Operating Hours — To express L10 life in hours: L10h = (L10 × 10^6) / (60 × n), where n is rotational speed in RPM. For example, a bearing with L10 = 1,000 million revolutions operating at 3,600 RPM has approximately L10h ≈ 4,630 hours. Modified Life (L10a) — Actual bearing life also depends on lubrication quality, contamination, speed, temperature, and bearing accuracy. ISO 281 defines a modified life factor (a₁ × aISO) that adjusts the theoretical L10 for these real-world conditions. High-quality lubrication and proper maintenance can extend bearing life significantly; poor lubrication or high contamination reduces it. Why It Matters for Maintenance — L10 life helps you schedule preventive maintenance, budget for bearing replacement, and select bearings adequate for your duty cycle. - What are dynamic and static load ratings, and why do they matter?: Static Load Rating (C₀) — The maximum load a stationary or slowly rotating bearing can support without permanent deformation of its rolling elements or raceways. Defined by ISO 76 as the load producing 0.01% permanent deformation of the rolling element diameter. Static load capacity is the limiting factor when a bearing operates at very low speeds or remains stationary under heavy loads. Dynamic Load Rating (C) — The constant load a bearing can endure for a specified number of revolutions (the L10 life, at which 90% of identical bearings are expected to survive). Dynamic load rating determines how long a bearing will last under rotating or oscillating motion. ISO 281 defines the L10 calculation using the formula: L10 = (C/P)^p, where C is dynamic load rating, P is equivalent dynamic load, and p is the life exponent (3 for ball bearings, 10/3 for roller bearings). Why They Matter — Static load rating determines if a bearing can handle peak loads without permanent damage (even if not rotating). Dynamic load rating determines operational life. For high-speed applications, dynamic rating is critical. For low-speed or stationary loads, static rating may be the limiting factor. Always verify both ratings against your application's load profile. - What bearing materials are available and which should I use?: Standard bearing materials include: - Chrome Steel — Premium bearing steel used by SKF, NSK, Timken, and most manufacturers. Offers excellent hardness, fatigue resistance, and durability in standard industrial applications. Most common for ball and roller bearings. - Stainless Steel — Provides corrosion resistance for applications in wet, humid, or chemically corrosive environments. Used in food processing, marine, and pharmaceutical equipment. - Ceramic Hybrid Bearings — Combine steel races with ceramic rolling elements. Offer reduced friction, lower heat generation, and higher temperature capability. Used in high-speed, high-precision applications and aerospace. - Polymeric Bearings — Utilize fluoropolymer composites with embedded graphite or PTFE. Provide low friction in high-speed applications where lubrication film breakdown would be problematic. Material selection depends on operating environment (temperature, moisture, chemical exposure), speed, load, and precision requirements. Standard chrome steel bearings suit most industrial MRO applications. - How do I choose the right bearing for my application?: Bearing selection depends on five key factors: 1. Load Type and Direction — Determine whether your application has radial loads (perpendicular to shaft), axial loads (along the shaft), or combined loads. Deep groove ball bearings suit primarily radial loads; tapered roller bearings excel at combined loads; thrust bearings handle pure axial forces. 2. Rotational Speed — Ball bearings support higher speeds with lower friction. Roller bearings are better for medium-speed, heavy-load applications. Verify bearing speed ratings against your operating RPM. 3. Load Capacity — Select a bearing with adequate load capacity for your application. Basic dynamic load rating (C) and basic static load rating (C₀) determine how much load the bearing can safely carry. 4. Lubrication Requirements — Choose between grease and oil lubrication based on speed, temperature, and load. High-speed or high-temperature applications typically require oil circulation; lower-speed applications can use grease. 5. Precision and Rigidity — Evaluate your application's tolerance for runout deviation. High-precision applications require tighter tolerances and higher-grade bearings. - What is a bearing and what does it do?: A bearing is a mechanical component that enables smooth rotational or linear motion by reducing friction between moving parts. Bearings support loads and facilitate the transfer of forces between moving elements, preventing direct metal-to-metal contact that would cause wear and heat buildup. Rolling element bearings contain balls or rollers that rotate within races (raceways) to minimize friction. Common types include ball bearings (used for moderate loads and high speeds), roller bearings (used for heavy loads at medium speeds), and angular contact bearings (designed for combined radial and axial loads). Bearings are essential in industrial equipment including motors, pumps, compressors, gearboxes, turbines, and conveyor systems.