# Dodge 004084 P4B-BAR-300 Four-Bolt Pillow Block Sleeve Bearing 3" Bore Expansion Cast Iron - MROSupply.com

***Dodge 004084 P4B-BAR-300 four-bolt pillow block sleeve bearing with 3" bore, tin babbitt insert, cast iron split housing, expansion (float) design, unsealed, powder coated finish, for low-speed journal applications.***



## Product details:

- Catalog number: 004084
- SKU: 123828
- Price: ***$742.13*** Each
- Shipping: ***FREE SHIPPING***  ON ORDERS OVER $100
- Typically Ships in: 1 day
- Brand: [Dodge](https://www.mrosupply.com/brands/dodge/)
- Category: 
    - [4-Bolt Pillow Block Bearings](htts://www.mrosupply.com/bearings/mounted-bearings/mounted-sleeve-and-plain-bearings/pillow-block-bearings/4-bolt-pillow-block-bearings/)
    - [Pillow Block Bearings](htts://www.mrosupply.com/bearings/mounted-bearings/mounted-sleeve-and-plain-bearings/pillow-block-bearings/)
    - [Mounted Sleeve and Plain Bearings](htts://www.mrosupply.com/bearings/mounted-bearings/mounted-sleeve-and-plain-bearings/)
    - [Mounted Bearings](htts://www.mrosupply.com/bearings/mounted-bearings/)
    - [Bearings](htts://www.mrosupply.com/bearings/)
- Unit of measure: each
- Weight: 27.850 lb
- Technicall support: contact supplier for technical support on +1-864-284-5700


## Product images:
- https://static.mrosupply.com/images/noimage.webp


## Product attributes;

  
- Base to center height: 2.5000 in, 63.5 mm
  

  
- Bearing type: Journal, journal
  

  
- Bolt Diameter: 0.6250 in
  

  
- Bolt to bolt max: 9.0000 in, 228.6 mm
  

  
- Bolt to bolt min: 8.5000 in, 215.9 mm
  

  
- Bolt width: 2.5000 in, 63.5 mm
  

  
- Bore length: 6.0000 in, 152.4 mm
  

  
- Expansion capability: Expansion (float)
  

  
- Finish: Powder coated
  

  
- Greasable: No
  

  
- Housing construction: Split
  

  
- Housing material: Cast iron
  

  
- Housing type: Four-bolt pillow block
  

  
- I.D.: 3 in
  

  
- Insert material: Tin babbitt
  

  
- Lubrication type: Grease
  

  
- Material: Cast iron
  

  
- Max RPM: 300 RPM
  

  
- Rolling element: Sleeve
  

  
- Seal: Unsealed
  

  
- Shaft diameter: 3.0000 in
  
## Product documents / software:

- [Instruction Manual](https://documents.mrosupply.com/product_documents/12/38/123828/330778_oCeNPsG.pdf)
- [2D DXF front](https://documents.mrosupply.com/product_documents/00/004084/baldor2d_004084_front_6fVilbt.dxf)
- [2D DXF right](https://documents.mrosupply.com/product_documents/00/004084/baldor2d_004084_right_YFoojHW.dxf)
- [2D DXF top](https://documents.mrosupply.com/product_documents/00/004084/baldor2d_004084_top_C2E9MR1.dxf)
- [3D DXF](https://documents.mrosupply.com/product_documents/00/004084/baldor3d_004084_JYQ4f9K.dxf)
- [3D DXF](https://documents.mrosupply.com/product_documents/00/004084/baldor3d_004084_yxl6nzP.dxf)

## Product's reviews:
- Torque springs - arrived quickly and good quality
- Great - great
- P90 coupler - These where a perfect match saved me time and money by getting them fro you guys
- Bearings - Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.




## FAQ:

- How do I choose the right type of bearing for my application?: Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints.
For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials.
In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.